Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [site-to-site-vpn]

460 questions
1
vote
1 answer

Azure site to site vpn to CISCO ASA 5550 using azure public ip addresses

I have a VPN with a gateway to connect to another network (a local mobile operator) which are using CISCO ASA 5550 Version 8.0(3), on azure side i would like advertise the public ip instead of the local azure network since the mobile operator…
Erick
  • 177
  • 2
  • 10
1
vote
1 answer

Cisco IPsec VPN with key-id on a specific tunnel only

I'm trying to work with another party to set up a site-to-site IPsec VPN between us and them. We are behind NAT, so need their Cisco (ASA 5510 on IOS 9.1.7) to match on our IKE id (key-id in Cisco parlance). The problem is the other party has said…
Mike
  • 177
  • 1
  • 11
1
vote
1 answer

pfSense allow one part of the network access to VPN Tunnel

I Have two pfSense routers (Router 1 and Router 2) ROuter 1 is VPN Server for other routers and in his LAN network are different servers like domain server, mail server... Router 2 is WiFI captiv portal. We have one subnet 192.168.1.0/23 and all…
Kando
  • 11
  • 3
1
vote
1 answer

Can't establish site to site vpn connection between Cisco 3900 and strongSwan client

I have website, which displays data, received from gsm modems. So i am trying to connect my website to GSM network provider using vpn. Provider side there is a Cisco 3900, configured as site to site vpn server and my side i have strongswan installed…
iss_628
  • 21
  • 1
  • 5
1
vote
1 answer

Site-to-site VPN on Meraki with AWS VPC?

we have multiple locations with Meraki Firewalls that are using the Meraki Site-to-site VPN connection in a Hub configuration. We would like to add our VPC to our Site-to-Site VPN so that if any location goes down, other branches will have a…
JeremyT
  • 13
  • 1
  • 3
1
vote
1 answer

client get not connected in pfsense openvpn site to site

I am trying to connect pfsense openvpn site to site (peer to peer shared key), but upto now I could not found any traffic between client and server. openvpn server log Listening for incoming TCP connection on [AF_INET]192.168.1.5:1194 openvpn…
Bilal Usean
  • 171
  • 1
  • 1
  • 14
1
vote
1 answer

Site-to-site tunnel using two MikroTik routers where one endpoint is behind NAT (LTE modem)

I would like to interconnect two offices where one has a public static IP address (main office) and the second one is behind NAT (no public IP) because there is just an LTE modem. I am able to create a one-way VPN connection from the LTE modem into…
adamsfamily
  • 285
  • 3
  • 10
1
vote
1 answer

Azure vpn is establish but causing delay or no traffic sometimes

We are trying to establish VPN Hillstone FW (device) with Azure. VPN details are: VPN type: Policy based Gateway Subnet: 192.168.50.10/29 default subnet: 192.168.50.0/29 VM inet Address: 192.168.50.4 and Other side Device : Hillstone FW server…
Hafiz Arslan
  • 119
  • 5
1
vote
0 answers

Particular workstations cannot reach specific servers in an openvpn site2site environment

It seems to be a weird problem to me. Here is the situation. I set up a site to site environment by openvpn (udp protocol), most servers and workstations can reach the other site but several servers failed. My environment is below, Site A Subnet…
Kyle Cui
  • 11
  • 2
1
vote
2 answers

Azure - multiple virtual network gateways?

Within Azure, can a single virtual network have two gateways, one for devices that are policy based, and the other for route based? If so, how? As to why I'm asking: I need to connect a legacy network in a hosted data center that only provides a…
Tim Brigham
  • 15,545
  • 10
  • 75
  • 115
1
vote
1 answer

Setting up port forwarding via UPnP on Windows Server 2008 R2?

I'd like to set up some port forwarding in our router, using UPnP. More specifically, I want to run some program on startup that always forwards port 8443 my IP address (192.168.1.100). Port 8443 is for our SVN server. How do I do this with Windows…
Contango
  • 1,150
  • 5
  • 15
  • 31
1
vote
0 answers

Cannot Route RDP Traffic Through AWS Site-to-Site VPN

Hi I have establish VPN connection to the AWS VPC, but still there are some routing issues that make RDP connections fail to initiate, because the router WAN IP is differs from the Public IP, lets say: Router Cisco Rv042 Public IP: 71.xx.xx.243…
jbsuser
  • 19
  • 3
1
vote
1 answer

RV325 to RV320 site to site ipsec tunnel

Gateway to gateway tunnel from RV325 to RV320 (either direction) won't connect. I can't find any sort of error log. Both are WAN1 (only one connected) and IKE PSK. Both local and remote groups are IP only. RV325 local == RV320 remote for IP and…
RadOD
  • 11
  • 1
  • 3
1
vote
2 answers

Can't manage / ping Sonicwall's LAN interface from across MPLS

We have two of our sites connected via an MPLS that bypasses our firewall. Traffic between the sites, when hitting our core switch is routed directly to a second interface on our ISP's router. The one thing we could never figure out how to fix is…
Geoff
  • 57
  • 1
  • 5
1
vote
1 answer

Pfsense multi site-to-site wan with policy based routing

We want to create a Hybrid multi WAN site to site connection between two (and more?) remote offices. The office has two WAN connections to the HQ. One MPLS and one ordinary Internet connection. In the end policy based routing should utilise both…
Daywalker
  • 495
  • 5
  • 25
1 2 3
…
30 31