Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [site-to-site-vpn]

460 questions
2
votes
0 answers

Is it possible to do IPSec Site to Site VPN without static & public IP on one end?

I am working on a project for my engineering degree that requires me to interface with some pre-existing equipment, so I am rather limited on my options. I'm rather new to VPN and ipsec for that matter. If I've got it completely wrong, please fill…
BobTuckerman
  • 448
  • 3
  • 8
2
votes
2 answers

Internal Site to Site VPN over MPLS speed issues?

How do I troubleshoot slow performance of a site to site VPN tunnel over a MPLS circuit? What are the relevant reports/stats I should be looking at? Background: I support one end of a Site to Site VPN that is used to connect two ends of a Process…
Randy K
  • 75
  • 1
  • 9
2
votes
2 answers

AWS VPN Tunnel going down without traffic

I managed to setup a site-to-site VPN connection from Amazon VPC to a company's network, and after a lot of configuration it was working fine, but now i realized that the VPN tunnel is DOWN every time there's no traffic going trough for a couple…
Asfura
  • 21
  • 1
  • 2
  • 4
2
votes
1 answer

How can I NAT traffic for one VPN to come from a different IP on Cisco ASA?

I have a Cisco ASA firewall between our private network (10.1.0.0/16) and the outside world, and multiple VPNS going to client sites. Existing: [10.1.0.2...] = source client | [10.1.0.1 ASA ]---{other VPNs...} | …
Iain Hallam
  • 447
  • 2
  • 6
  • 22
2
votes
3 answers

How quickly should data/files be visible on a network share that goes through a VPN tunnel?

I'm looking for information on how information is shared/passed across a network between a Windows 7 client OS and a Windows Server 2008 server? Little history of our setup (I apologize as for Im not a network guy, so this may be overly vague): We…
ProfessionalAmateur
  • 937
  • 6
  • 17
  • 27
2
votes
1 answer

L2TP server - site-to-site vpn connection

I am not sure this is the right place for this question but here goes. We want to connect users using an L2TP VPN connection to a users at the other end of a SonicWall site-to-site VPN. Currently we have a SonicWall firewall/router contraption in…
Pyro
  • 123
  • 5
2
votes
0 answers

ASA Site to Site VPN Version 8.4 Natting Same Subnets

My site and client site has same Lan IP range. Both using ASA version 8.4 Site A : 192.168.18.0 Site B : 192.168.18.0 Please tell me how to do Natting on 8.4 Any help would be highly appreciated. Regards, Kinnu
kinnu
  • 21
  • 1
2
votes
1 answer

Problems with packets on IPSEC Tunnel for Windows 2008 R2

I have a network with a Windows 2008 R2 server with Routing and Remote Access installed on a cloud platform with a PUBLIC and PRIVATE IP address. I have successfully configured the Fortigate FW and the 2008 server to negotiate Phase 1 and Phase 2…
KodeTitan
  • 881
  • 2
  • 10
  • 15
2
votes
0 answers

IPSec VPN : Traffic not routing correctly

We have a server which is windows 2008 running on a VPS with a single public IP address. I've configured the firewall to allow IPSEC VPN connections to be established with our Draytek routers at remote sites, and the VPS has it's private IP address…
Michael Round
  • 21
  • 1
2
votes
1 answer

Recommendation for a virtual site-to-site VPN appliance

can you please recommend an Virtual Appliance or Operating System for creating multiple site-to-site VPN? The appliance must of course handle IPSec. It should also be OpenVPN capable. An Additional SSL VPN is a plus. It should run on normal…
Roman
  • 392
  • 1
  • 7
  • 20
2
votes
2 answers

Replace Cisco 2600 PTP T1

Our office and an outside location have a dedicated T1 point to point connected with Cisco2600's. We need to eliminate the need of the T1 circuit as it is costly and would like to route the traffic over our main ISP with Comcast. I'm pretty sure I…
xedgex
  • 91
  • 1
  • 1
  • 5
2
votes
1 answer

VPN IP Routing - slow connections

UPDATE: Router error logs show: LCP Time-out 0 I'm not sure how to correct this. The Lan-to-Lan profiles are set to -1 Idle Timeout (for the remote branch). I have a PPTP VPN running between two Draytek 2820 routers. They are setup that one dials…
dannymcc
  • 2,717
  • 10
  • 48
  • 72
2
votes
1 answer

Incorporating LogMeIn Hamachi into your own work network as dedicated VPN solution

I've been using LogMeIn Hamachi for a while for personal use and recently I started to wonder how to (and if at all) implement it as full blown VPN solution for my multiple clients. Those are usually small companies ranging from 5 to 60 people…
MadBoy
  • 3,725
  • 15
  • 63
  • 94
2
votes
1 answer

Will a Checkpoint Safe@Office 500WP Respond to Site to Site VPN (IPSec) on WAN2?

Pretty simple - if I have two WANs, will the site-to-site VPN work if I specify the WAN2 IP address? (It currently works with the WAN1 IP.)
tacos_tacos_tacos
  • 3,250
  • 18
  • 63
  • 100
2
votes
2 answers

DD-WRT PPTP VPN problem

I try to configure a DD-WRT as a PPTP client. The VPN Server is Windows Server 2003. This is my scenario: The Windows 2003 Server has set to give to the VPN Client the 10.0.0.81 fixed IP and to add a network route to the remote home. At the remote…
Tobias Tromm
  • 100
  • 2
  • 10
1 2 3
…
30 31