Questions tagged [nat]

In computer networking, network address translation (NAT) is the process of modifying network address information in datagram (IP) packet headers while in transit across a traffic routing device for the purpose of remapping one IP address space into another.

Most often today, NAT is used in conjunction with network masquerading (or IP masquerading) which is a technique that hides an entire IP address space, usually consisting of private network IP addresses (RFC 1918), behind a single IP address in another, often public address space. This mechanism is implemented in a routing device that uses stateful translation tables to map the "hidden" addresses into a single IP address and readdresses the outgoing Internet Protocol (IP) packets on exit so that they appear to originate from the router. In the reverse communications path, responses are mapped back to the originating IP address using the rules ("state") stored in the translation tables. The translation table rules established in this fashion are flushed after a short period unless new traffic refreshes their state.

As described, the method enables communication through the router only when the conversation originates in the masqueraded network, since this establishes the translation tables. For example, a web browser in the masqueraded network can browse a website outside, but a web browser outside could not browse a web site in the masqueraded network. However, most NAT devices today allow the network administrator to configure translation table entries for permanent use. This feature is often referred to as "static NAT" or port forwarding and allows traffic originating in the "outside" network to reach designated hosts in the masqueraded network.

Because of the popularity of this technique (see below), the term NAT has become virtually synonymous with the method of IP masquerading.

Network address translation has serious drawbacks on the quality of Internet connectivity and requires careful attention to the details of its implementation. As a result, many methods have been devised to alleviate the issues encountered. See the article on NAT traversal.

2002 questions
0
votes
1 answer

How do I configure routing from host system to virtual machine?

I have an Ubuntu host system that is running a MAC-VLAN virtual interface on top of eth0 interface, ipv4 routing is enabled. Also, this system has a Docker (LXC) container running: docker0 Link encap:Ethernet HWaddr d6:00:77:0f:ab:9e inet…
demeshchuk
  • 111
  • 2
0
votes
1 answer

Port forwarding to the local network machines for local network users

All machines in my network based on linux. Main server has 192.168.0.1, mail server has 192.168.0.2, client machine has 192.168.0.3 ip. I've added iptables -t nat -A PREROUTING -d 192.168.0.1 -p tcp -m tcp --dport 25 -j DNAT --to-destination…
hraphrap
  • 237
  • 2
  • 16
0
votes
2 answers

How to get internet access in a Windows 7 virtual machine

I am running Windows 7 Ultimate and have now set up two virtual machines in Virtual PC. One is the XP Mode machine which runs XP (obviously). When I set it's network connection to Shared Networking (NAT), it gets internet access without any…
Svish
  • 6,977
  • 15
  • 38
  • 45
0
votes
2 answers

Remote Management (VNC-style) without Port Forwarding

Is there a way of setting up a VNC-style server (RDP would do as well) on machines behind NATs, and have access to them? Should be technically possible by having outgoing connections from the NATed terminals to a server, waiting for a remote user to…
0
votes
1 answer

Forwarding everything from external DMZ ip to NAT ip using iptables

I know there are a lot of questions about this, but I still struggling to get it working. I have a firewall which has 3 external IPs. (IPs have been changed randomly for security) eth0 Link encap:Ethernet HWaddr 50:46:5d:64:ed:e4 …
Edward van Kuik
  • 226
  • 2
  • 6
0
votes
1 answer

Use External DNS Record local with additional subdomains

We have a server in our LAN which is locally available at a fixed ip. We now have a DDNS Service and a port forwarding rule to make the server available from outside. Additional we added subdomain at our like server.example.com pointing to…
pfried
  • 83
  • 1
  • 10
0
votes
2 answers

GRE (IP protocol 47) NAT rules seem to expire

I have a machine that is connected to another host over a permanent GRE tunnel. I have put the machine behind a Linux firewall (Smoothwall), and NAT-ed all GRE packets to the machine, using the rules: /sbin/iptables -t nat -A PREROUTING -p 47 --src…
andi
  • 143
  • 1
  • 2
  • 12
0
votes
1 answer

routing behaviour (PAT/NAT)

|(eth0: 84.23.13.43) +--------------+ | | | NAT router | | | …
netsplit
  • 3
  • 1
0
votes
3 answers

Setting up VMWare ESXi 5 with a single physical NIC

I have a cheap but powerful dedicated server I am leasing with OVH, because they were recently having a promotion. I would like to try and manage all this power by playing with VMs using ESXi. However I am only provided with a single NIC. I had…
deed02392
  • 278
  • 1
  • 5
  • 16
0
votes
1 answer

How to NAT behind public IP on pFsense before IPSEC to Cisco ASA?

I have two networks: Local 192.168.1.0/24 and Remote 10.8.8.8/24. On the local network I have installed pFsense as gateway. On the remote network there is a Cisco ASA that I don't have control over. (It's a hosting company's.) They're saying that…
WarP
  • 41
  • 1
  • 7
0
votes
2 answers

IPTables: NAT multiple IPs to one public IP

I'm looking for a way how to nat 2 or more inner IPs (in my case xen doms) to one outer IP. I tried to use iptables -t nat -A PREROUTING -d 123.123.123.123 -j DNAT --to 1.2.3.4 --to 1.2.3.7 iptables -t nat -A POSTROUTING -s 1.2.3.4 -j SNAT --to…
Kaemmelot
  • 5
  • 1
  • 5
0
votes
1 answer

Using Linux just for doing QOS on an existing network

I have a proprietary web filtering device which also functions as a NAT router. It's one interface has a public IP and another interface has a private IP. All local clients connect to the interface with the private IP and they get IP address via…
nixnotwin
  • 1,543
  • 5
  • 35
  • 55
0
votes
1 answer

1:1 NAT and ARP issue iptables

Gateway machine with 2 NIC one connecting public network and one for private network. Gateway: eth0 4.x.x.3 Eth1:10.10.11.3 There are 5 Machines with this as gateway all with ip 10.10.11.5---9 with gateway as 10.10.11.3 DNAT : Chain PREROUTING…
Blue Gene
  • 635
  • 1
  • 5
  • 10
0
votes
3 answers

Forward traffic to local LAN IP while keeping the originator IP

I am trying to forward traffic from one server to another, while keeping the origin requestor IP. Therefor I cannot use SNAT or MASQUERADE. SERVER A: Public IP: 111.111.111.111 Private IP: 10.0.0.1 SERVER B: Public IP: 222.222.222.222 Private IP:…
Daniele Testa
  • 661
  • 4
  • 10
  • 18
0
votes
1 answer

NAT one network to another using iptables

Trying to NAT ips in different network using iptables. KVM host with ip 10.10.11.36 on bridge br0. Two vms are running with ip 192.168.11.60 and 192.168.11.57 sharing bridge br0. Want to NAT all request coming on 10.10.11.60 to 192.168.11.60. How…
Kevin Parker
  • 757
  • 1
  • 13
  • 32