Questions tagged [modem]
142 questions
0
votes
2 answers
Setting up a Cisco router for dial in access
Our MPLS provider needs our routers to be setup with modems so that they can dial in and make config changes when necessary. I have connected the modem to the router (Cisco 2600) via the aux port. When I dial the # for the modem, it rings, but never…
Citizen Chin
- 532
- 2
- 12
- 21
0
votes
1 answer
Easy management of multiple connections
on a Windows 7 machine I need to switch back and forth two connections: the LAN connection (that works behind a proxy) and a wireless connection via a USB modem. This requires every time to activate / deactivate two connections in the manager and…
pistacchio
- 447
- 7
- 18
0
votes
2 answers
Is the WAN IP of an ADSL modem likely to remain the same if it is not rebooted?
Is the WAN IP of an ADSL modem likely to remain the same if it is not rebooted?
Do ISPs change the WAN IP of an ADSL connection while in session (ie. prior to reboot) ?
CJ7
- 653
- 10
- 24
0
votes
2 answers
Routing static IP traffic on a Comcast Business Class IP Gateway (SMCD3G-CCR)
We are in the process of replacing our firewall, which is currently the only thing connected to our Comcast Business Class modem. Comcast gives us 5 static IP addresses. Currently, all traffic to all 5 static IPs goes directly to the existing…
Jake Wilson
- 8,814
- 29
- 97
- 125
0
votes
1 answer
T38modem manuals?
Are there any T38modem users here?
I'm trying to figure out how to call T38modem with SIP. I've got everything except the --route option for receiving. I know my own phone number, but I am not sure how to set it up.
Currently, I have:
--route…
Brian Postow
- 192
- 1
- 10
0
votes
1 answer
Intermittent disconnect: which needs replacing, the router or the modem?
We have a WatchGuard SOHO 6 with the latest firmware (6.4.1) and an ISP-supplied DSL modem. The firebox's PPPoE settings look like this:
We've been having a problem lately where our internet service will go down every once in a while at no…
Kev
- 984
- 4
- 23
- 46
0
votes
0 answers
How to SSH into a computer connected to a modem while connected to a router that's bridged to that modem?
I have a Modem/Router (NAT) that authenticates to my ISP's fiber optic cable. This modem has one ethernet cable connected to my Computer and another to the WAN port of a Wi-Fi router.
The Router is set to Bridged mode. Connected to this router is a…
Thums
- 101
0
votes
0 answers
How to create VLAN in ZTE ZXHN H298A Router
I have a router / modem called ZTE ZXHN H298A V1.0 TTN.19T4_210317.
I'm sharing my network with neighbours but I want to capsule my network and/or the guests network to protect my local network. So I tried to create a VLAN for the guest's WiFi but I…
kanka.dev
- 21
- 1
- 1
- 3
0
votes
2 answers
ISP configured Dynamic IP is different from what websites see when I access them
We switched our internet connection and now something wired is going on.
I am using a TP Link Archer 1600 modem.
The ISP asked me to set connection type as "Dynamic IP" under EWAN settings. Internet is working just fine.
But my modem shows the below…
Mathew Paret
- 95
- 1
- 8
0
votes
1 answer
How do I hook up a business modem with 6 ports to a switched network?
I have a small business modem that has 6 ports on it, each being a static IP.
My network has grown however to the point where I have more than 6 devices, so I am moving to use a switch, which has other benefits as well.
Does that make my 6 static…
Tyler Durden
- 477
- 1
- 6
- 16
0
votes
1 answer
Strongswan works on embedded device via ethernet but not with 4G modem
I have a Gateworks SBC with an installed Ubuntu 20.04.
My SOC is connected with an USB to ethernet adapter (eth0) as DHCP Client (192.168.88.102) to my Mikrotik router (DHCP Server), which acts as my gateway to internet(Masquerade).
I have installed…
Gerbaum
- 1
- 2
0
votes
2 answers
Permission denied in Kannel server
Kannel Server is giving me this error on /var/log/kannel/smsmodem.log
I have a Centos 7 server with kannel-1.4.4
2020-07-23 17:39:00 [4245] [6] ERROR: System error 13: Permission denied
2020-07-23 17:39:00 [4245] [6] ERROR: AT2[modemgsm]: Couldn't…
Billy Vejo
- 13
- 5
-1
votes
1 answer
How to know if 2 ethernet ports of the same modem are separated?
I have a Digi TransPort WR family of 3G/4G cellular routers with 2 ethernet ports, digi told me that the ethernet ports are separated but i want to know if they are not in the same network it's a matter of security just to be sure that you can't…
B.Abd
- 1
-1
votes
1 answer
Can we use a ADSL2+ modem in bridged mode to convert to ethernet WAN?
I am no networking master, so I have no clue if this makes sense.
I have a DSL line from my internet provider with all the service details. Now, I have a TP-Link modem (+router) WD8961N. This is currently running in PPPoE mode. Works perfectly.
My…
weirdpanda
- 101
- 3
-1
votes
1 answer
Connecting iPad Pro to the internet via Ethernet
Okay, so you would think my client wanting to get an iPad online via ethernet would be simple and straight-forward way for me to earn $20. When I arrived, this is the setup I found:
The iPad Pro (model MQDX2LL/A, with software version 14.4.1)…
