Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [mikrotik]

Latvian manufacturer of computer networking equipment, known for the Linux-based operating system known as MikroTik RouterOS.

The main product of MikroTik is a Linux-based operating system known as MikroTik RouterOS. Installed on the company's proprietary hardware (RouterBOARD), or on standard x86-based computers, it turns the computer into a network router and implements various additional features, such as firewalling, virtual private network (VPN) service and client, bandwidth shaping and quality of service, wireless access point functions and other commonly used features when interconnecting networks.

http://en.wikipedia.org/wiki/MikroTik

317 questions
1
vote
3 answers

Integration of Active Directory, Squid and traffic shaper (like MikroTik)

We have a large network in our university with about 10000 users. We have an AD and wants to use a Squid server for caching and NTLM authentication. We have 40 Mbit/s Internet too, we are going to share it. In AD we have students, teachers, ... OUs…
Ansari
  • 227
  • 5
  • 12
1
vote
2 answers

How to set a default page within hotspot MikroTik to be open automatically after wifi connect

I'm trying to set a Default HTML Page to be opened after wifi connects automatically. Kinda like the Login page. I've tried writing a few javascript lines to make the redirect work but after redict, there is no content within my HTML. Is it…
Valkyrie
  • 113
  • 1
  • 4
1
vote
0 answers

Strongswan CentOS 7 to Mikrotik Router L2TP VPN "NO_PRPOSAL_CHOSEN"

I have reviewed existing Q&A on this issue and, maybe there's a hook I'm not seeing, but I don't know what else to try. I get this output when attempting to launch VPN from CentOS "client": [root@hostname etc]# strongswan up casanova_vpn initiating…
dmmooney
  • 11
  • 2
1
vote
0 answers

How to allow responding to broadcast pings on Mikrotik RouterOS?

By default, most systems don't respond to broadcast ping requests. However, there exist ways to explicitly allow responding to broadcast ICMP requests on multiple systems, such as Linux. How can I enable responding to broadcast ping requests on…
TheNavigat
  • 163
  • 1
  • 9
1
vote
1 answer

How to debug Mikrotik bridge filter forward rules not having any effect?

As part of diagnosing a different problem were trying to add a bridge filter rule that will stop all traffic from forwarding between two interfaces on a bridge. The router has two interfaces ether1 and ether2 on a bridge. we then added a rule with…
Arthur Ulfeldt
  • 3,249
  • 9
  • 33
  • 40
1
vote
1 answer

MikroTik Capsman is trying to push network channel configurations that are not allowed by access points

According to information from allowed-channels command on my Access Point the allowed channels are the following: 5180/20-Ceee/ac, 5260/20-Ceee/ac/DP, 5745/20-Ceee/ac, 5750/20-Ceee/ac, 5755/20-Ceee/ac, 5760/20-Ceee/ac, 5765/20-Ceee/ac Despite the…
SiliconMind
  • 161
  • 3
  • 9
1
vote
2 answers

Trying to get VLANs working between Mikrotik HAP AC and RB4011iGS+

Here is the network diagram: I have set up 3 vlans: vlan1: 192.168.9.0/24 vlan11-lan: 192.168.11.0/24 vlan22-guest: 192.168.22.0/24 vlan1 is working perfectly. Every host in 192.168.9.0/24 network is pinging each other. vlan11-lan and vlan22-guest…
Rualark
  • 111
  • 1
  • 6
1
vote
1 answer

How to reserve a static-ip on Mikrotik router for a device that is attached to a fixed router's Ethernet port

I am trying hard to figure out how can I force any DHCP client device connects to the port ETH10 on Mikrotik router get assigned a fixed IP-address. Please note that the device MAC address is unknown and I will not reserve the static IP address…
Sina S.
  • 11
  • 1
  • 2
1
vote
1 answer

Make a Mikrotik Router behave as a separate router on each port

We use Mikrotik routers for many points in our system, but we have an odd need for one location. We would like to use one router (example: RB960PGS-PB), where the main Internet connection comes in on port 1, and have ports 2-5 each act as a separate…
JasonP
  • 13
  • 3
1
vote
1 answer

Mikrotik routing VPN packets to wrong interface

I'm trying connect my network to AWS VPC using Static IP AWS VPN. I've followed the instructions of AWS and configured correctly my MikroTik router and can ping the Ubuntu instance I've attached in this VPC. As I have 2 ISP in my MikroTik, I…
brevleq
  • 121
  • 10
1
vote
1 answer

Mikrotik - NAT behind NAT

I have two routers, one given by the internet provider, which I cannot control ( only they can ) and the second is my Mikrotik HAP ac (RB962UiGS-5HacT2HnT). My router was primary before, and I had several ports forwarded. Now it's secondary, so I…
kkazakov
  • 131
  • 1
  • 5
1
vote
0 answers

RouterOS sending malformed packets

I have a Routerboard 951G-2HnD which runs latest stable: RouterOS v6.50.5 Firmware v3.41 The board acts as the WiFi AP in WPA2-PSK mode. Recently I have noticed unhealthy amount of traffic sent from AP to clients for no good reason. Example of…
user218324
1
vote
3 answers

Order of external DNS servers on Router OS DNS Server

We have DNS server on our Mikrotik (RouterOS 6.36). [admin@xxx] /ip dns> print servers: 10.0.10.3,8.8.8.8 dynamic-servers: allow-remote-requests: yes max-udp-packet-size: 4096 query-server-timeout: 2s …
pagep
  • 137
  • 2
  • 9
1
vote
2 answers

How to disable TCP timestamps on a Mikrotik router?

I'm using OpenVAS as vulnerability scanner and I completed a local network scanning which also involves a MikroTik router as default gateway. The router shows a weakness, better known as "TCP timestamp" vulnerability. In light of the above, how…
L.Bas
  • 13
  • 6
1
vote
1 answer

Mikrotik IPV6 dhcp client

The DHCP client in my mikrotik router never obtains a ipv6 address or prefix, when connected to internet. I understand I need a prefix, so the devices on my lan can get a valid external IP. However when I connect my laptop everything works as…
Paul van Brenk
  • 129
  • 5
1 2 3
…
21 22