Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [mikrotik]

Latvian manufacturer of computer networking equipment, known for the Linux-based operating system known as MikroTik RouterOS.

The main product of MikroTik is a Linux-based operating system known as MikroTik RouterOS. Installed on the company's proprietary hardware (RouterBOARD), or on standard x86-based computers, it turns the computer into a network router and implements various additional features, such as firewalling, virtual private network (VPN) service and client, bandwidth shaping and quality of service, wireless access point functions and other commonly used features when interconnecting networks.

http://en.wikipedia.org/wiki/MikroTik

317 questions
2
votes
2 answers

On Mikrotik RouterOS, is it possible to get Netflow information from a bridged connection?

I have a RouterOS box set up to bridge two ethernet connections. I have use-ip-firewall=yes in the bridge configuration, so that the ports go through the firewall. I've enabled netflow reporting via ip/traffic-flow, but the only packets I see…
Tim
  • 277
  • 4
  • 6
  • 13
2
votes
2 answers

Mikrotik Wifi on Android keep on disconnecting

My company recently purchased a few Mikrotik hAP Mini. These units are used for Site to Site VPN. The first unit I setup manually worked flawlessly. I then exported the configuration to the second, third and fourth units. On these 3 units, when my…
willwill
  • 141
  • 1
  • 4
2
votes
0 answers

ssh via static route on different subnet hangs after approx. 30-40 s

Before I had this setup: LAN: 192.168.1.0/24 (GW/router: 192.168.1.1) -> router 192.168.1.111 -> LAN2: 192.168.88.0/24 First router/GW pfSense box, second router Mikrotik (with firewall etc.). To access e.g. the host 192.168.88.10:22, I had a port…
ppenguin
  • 106
  • 7
2
votes
0 answers

Why is port forwarding in Mikrotik RouterOS stuck at SYN_RECV?

I'd like to set up port forwarding of tcp port 8000 -> 192.168.1.16:4200 on my Mikrotik RouterOS. I've done the following: /ip firewall nat add dstnat chain=dstnat action=dst-nat to-addresses=192.168.1.16 to-ports=4200 protocol=tcp…
adamsfamily
  • 285
  • 3
  • 10
2
votes
1 answer

Mikrotik IKEv2/ipsec + Windows 10 = no split include routes

I am deploying a solution using IKEv2+ipsec with certificates to connect roadwarriors to corporate network. Mikrotik CHR is used as entry point. All was swift until I started deploying the solution on Dell notebooks. Once connection to the router is…
Eugene
  • 297
  • 1
  • 12
2
votes
1 answer

Why VRRP require /32 netmask?

In a VRRP configuration I've been using /32 subnet mask but I've never know the reason behind. Sometimes I've using the same subnet mask as the primary interface, like /24, and in some cases it works and int others, until I set up /32, it…
rfmoz
  • 772
  • 9
  • 15
2
votes
0 answers

RouterOS shell command result with Ansible is different?

You will see, I have a little problem with the execution of an Ansible task, since I am giving it the same command that I work with in the Mikrotik shell, but the result is a little different and I just don't understand why. You will see, I am…
Fabio Orefice Amez
  • 35
  • 5
2
votes
1 answer

Too long TCP handshake while doing NAT

I've installed Mikrotik hEX at location 'A', Mikrotik hAP AC^2 at location 'B', and connected each with OVPN L2. Both two routers have their NAT features turned on, and have their private network. hEX has network 192.168.0.0/23, and hAP has network…
Sam
  • 45
  • 1
  • 1
  • 4
2
votes
2 answers

DNS-over-HTTPS for Windows DNS server forwarding?

Is it possible to configure DNS Forwarding of Windows Server 2019 AD DNS servers using DNS-over-HTTPS, or do I need to use an intermediary server internally to resolve using DoH and return regular clear test DNS results to the Windows DNS…
Braedon King
  • 33
  • 1
  • 4
1
vote
0 answers

VLAN Config on Mikrotik RB4011

I'm trying to configure the router to have two subnets 192.168.1.0/24 and 192.168.2.0/24. The first subnet is the default and all ports should use this as the default IP range, the second subnet should only be active when plugged into ETH2 Port on…
jfreak53
  • 163
  • 1
  • 4
  • 27
1
vote
0 answers

Route trafic from one wAP to VPN

i have two mikrotik routers. One router - 2011 (main) has public static IP address and has L2TP over ipsec vpn server running on it. I can connect to it from laptops and mobiles. When i connected, my ip changes to routers ip. The second router 4011…
swift2geek
  • 111
  • 4
1
vote
0 answers

route internet traffic through vpn failed (mikrotik, tried ikev2 & gre tunnel)

want to route some internet traffic through vpn, from local site to remote site router(R2) R1: LOCAL site (750Gr3): LAN / 172.16.1.1/24, gre over ipsec tunnel ip: 192.168.8.1/24 R2: Remote site (CHR, cloud vm): WAN / 172.18.0.4/24,LAN /…
user6308
  • 111
  • 3
1
vote
1 answer

How to route a file to specific gateway?

I have Windows 8.1 Enterprise I am connected to two internet connections on my PC with this gateways: 192.168.1.1 = my isp gateway 192.168.43.1 = my mobile usb tethering gateway Now I want to route my "VPN.exe" file to 192.168.43.1 gateway…
alex leiyss
  • 11
  • 1
1
vote
1 answer

Mikrotik - Route Specific IP over VPN

I have a PPTP VPN connection setup on my Mikrotik router. I would like to route only one IP on my local network over that VPN Connection. All traffic for that IP address can be routed over VPN. How does one go about setting it up on the Mikrotik…
stoic
  • 131
  • 1
  • 6
1
vote
2 answers

Mikrotik - lots of tcp retransmission packets

I have a ubuntu server with ip 192.168.10.144, in this server I have a docker network using ip range 10.0.0.0/24. I need connect my computer to some services running in docker, so I've added a route in Mikrotik: # DST-ADDRESS PREF-SRC …
brevleq
  • 121
  • 10
1 2 3
…
21 22