Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [mikrotik]

Latvian manufacturer of computer networking equipment, known for the Linux-based operating system known as MikroTik RouterOS.

The main product of MikroTik is a Linux-based operating system known as MikroTik RouterOS. Installed on the company's proprietary hardware (RouterBOARD), or on standard x86-based computers, it turns the computer into a network router and implements various additional features, such as firewalling, virtual private network (VPN) service and client, bandwidth shaping and quality of service, wireless access point functions and other commonly used features when interconnecting networks.

http://en.wikipedia.org/wiki/MikroTik

317 questions
0
votes
0 answers

Mikrotik CHR with public ip behind a proxmox Eoip not work

i have this problem: I have a ionos dedicated server i have installed a proxmox on it, i have an additional ip address for my routeros virtualized machine ionos delivered me this ip via vlan 1010: enp35s0-vid1010->Vmbr0<--CHR RouterOS ether1…
Daniele Bertocci
  • 1
0
votes
0 answers

Windows 11 IKEv2 fails to connect, error code 1931 eventID 20227

I have Mikrotik configured for accepting IPSec connections with server certificate and RADIUS auth, SHA1 and so on enabled on Mikrotik side for Windows compatibility. It also configured for L2TP/IPSec, which I used previously for remote work and…
SelfishCrawler
  • 127
  • 1
  • 5
0
votes
0 answers

Mikrotik NAT rules does not trigger

I have a LAN subnet 192.168.10.0/24 connected to my CCR-1036. this router acts as DHCP server and Hotspot for users to access internet, a third party accounting server (172.17.1.0/30) is connected to this CCR-1036 router as well. The router is…
xtg
  • 1
  • 1
0
votes
2 answers

New network not using updated TLS and failing to connect to certain websites

I have 2 networks that are configured just about identically. The both have the same Router - Mikrotik RB2011UiAS-RM, with a direct fiber link to the ISP. I am using the same ISP for both networks. My first network has been up and running with no…
fatdollar
  • 1
  • 4
0
votes
0 answers

Specify l2tpv3 ethernet's CircuitID and DigestHash in linux

How can I Create a l2tpv3 tunnel in linux and specify circuit id and digest hash (tunnel between linux and mikrotik)
Mahdi
  • 1
0
votes
1 answer

Mikrotik Ovpn with RADIUS

I need to setup OpenVPN server on a Mikrotik router. The authentication for the clients needs to be done by a Windows RADIUS server. My problem is that the Mikrotik uses the unencryptrd PAP protocol to comunicate with the RADIUS server when…
Smoke
  • 66
  • 2
0
votes
1 answer

Why are certain TCP connections extremely slow, except while running a packet capture on the router?

I have a weird issue with my MikroTik RouterBOARD hEX - RB750Gr3 (running Router OS 7.8). Certain TCP connections are extremely slow, for example this 93 KB file takes ages to download from the clients in the router’s LAN: curl…
aaronk6
  • 416
  • 6
  • 14
0
votes
0 answers

Adding new wifi vlan to Mikrotik router - cannot ping

Previously I had vlan 10 (Wifi) and 20 (Management) already set and working correct for this setup: Mikrotik router RB2011iL, D-Link switch with trunk ports for both vlans, couple of Mikrotik CaPs and Ubiquiti APs. Now I need to add another Wifi…
SelfishCrawler
  • 127
  • 1
  • 5
0
votes
0 answers

how to use SOCKS proxy username,password generated by Private Internet Access in Mikrotik routerboard

I have subscription at Private Internet Access application. I need the way to use SOCKS username and password in mikrotik u951 to make all traffics through this SOCKS proxy. thanks a lot.
Anas4795
  • 1
  • 1
0
votes
0 answers

Openvpn Client Doesn't Route

Hello I setup a mikrotik openvpn server I am able to successfully login into router my problem is it doesn't route anything and this problem only appears on ovpn l2tp and pptp works fine.when I search what is my IP I see my own IP not the routers IP…
Hoodad Tabibi
  • 109
  • 6
0
votes
1 answer

One port 2 external ip linked to MAC split by LAN ports

The provider issues 2 static addresses linked to the MAC address of the device on one port. Is it possible to divide the ports of the Mikrotik router into traffic exchange through each address? For example: WAN (ether1 port): 192.0.2.11 (gateway…
Serrver
  • 1
0
votes
0 answers

IP Tunnel - First router is not sending traffic to the second one

I'm a beginner when it comes to Mikrotik . I'm trying to run an IP tunnel between 2 RouterOS . First Router is set up as PPTP and L2TP server and clients can connect and use the internet but what I want to do is to set up an IP tunnel so when…
Mr Pro
  • 33
  • 3
0
votes
0 answers

Port isolation not working with MikroTik RB750Gr3

Very simple setup. Trying Switch chip port isolation. This router/switch does have a switch chip. Reset configuration to default OOB. Switch > Port Isolation > set every port to Override Forwarding to only ether1. How is it at all possible that…
Bluebaron
  • 149
  • 7
0
votes
1 answer

Internet stopped working after upgrading RouterOS 6 to RouterOS 7

I would like upgrade RouterOS 6 to RouterOS 7, everything went fine, all interfaces went up, but the Internet did not appear for users. As I understand it, somewhere need to change routes / something else for the new OS7? The config that works now…
Dark Dude
  • 1
  • 2
0
votes
1 answer

Mikrotik - Access from VPN to LAN

There is a VPN server on Mikrotik to connect from internet to the network behind the router. Like: LAN -> Mikrotik <-> VPN <- PC in internet I can connect but can't access PCs on LAN when I connect from outside. Here's IP pools: dhcp:…
Arrovil
  • 101
  • 2
1 2 3
…
21 22