Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [megaraid]

200 questions
0
votes
2 answers

MegaCli create virtual drive from new disk (is it dangerous for the existing array?)

This is a linux system with a MegaRaid controller. MegaCli is installed. I currently have: Virtual Drive: 0 (Target Id: 0) Name : RAID Level : Primary-6, Secondary-0, RAID Level Qualifier-3 Size : 25.466…
Viko
  • 35
  • 1
  • 4
0
votes
0 answers

LSI Raid controller: identifying failing hard disk (MegaCLI)

Info: I have a LSI 9265-8i controller. It's been running pretty well for two years. More recently it looks like a drive may be failing - no errors reported and no media issues reported when viewing "MegaRAID Storage Manager". Performance on one of…
RGI
  • 159
  • 2
  • 8
0
votes
1 answer

LSI MSM on Windows : SSL error when connecting remotely to a Ubuntu server

I've got LSI MSM (14.08.01.01) installed on a Windows Server. The manager works well here, and I am able to manage the local RAID on that server. However, when I attempt to connect to a Ubuntu server to manage its RAID i get the following error on…
sbrattla
  • 1,578
  • 4
  • 28
  • 52
0
votes
1 answer

megacli: Failed to alloc kernel SGL buffer for IOCTL

Today one of my servers started sending me alerts about non-optimal RAID state. These were triggered by a very simple script run by cron -- if it detects that not all of the disks report 'Optimal' state, it sends an alert. Now, the issue is that the…
Erathiel
  • 711
  • 3
  • 10
  • 21
0
votes
1 answer

LSI MegaRAID 84016e reboots server

Have problem with my LSI 84016e. Have mobo Supermicro x8sil-f. Have installed RAID adapter, have booted to Debian 7, have created RAID10 and started just simple dd write test. Several beeps and server goes to reboot. In dmesg/messages logs Buffer IO…
expream
  • 41
  • 5
0
votes
1 answer

Merge two sas card into one

I have one existing raid card (9240-8i)with 8 sas hdd, but i want to add 8 more hdd with another raid card (same model), but i wan to merge with existing raid and add it as expansion, can it be done?
Min Hong Tan
  • 147
  • 2
  • 11
0
votes
1 answer

Is it possible to use megacli to copy from one partition to another?

Except "dd" and "rsync", is it possible to directly use the megacli command to copy one partition to another? I am using h310 raid controller, and it seems not working well using "dd" or "rsync", which sometimes results in firemware failure, reset…
user180574
  • 225
  • 1
  • 3
  • 12
0
votes
2 answers

LSI MegaRaid live conversion from RAID 6 to RAID 0+1

I've currently got a lovely working server that has an LSI 9265-8i RAID card in it with 4x1TB RE4 drives, also running CacheCade Pro 2.0 with 2x180GB SSDs in RAID1. I currently have the main array running on RAID6, as much as I like it. I think…
Chrisjc
  • 27
  • 1
  • 3
0
votes
1 answer

LSI Megaraid 150-6 as regular SATA controller

I have an old but reliable server board that does not have any SATA ports on it. Also i have LSI Megararaid 150-6 (with latest firmware) which i want to use as ordinary "dumb" SATA controller. I don't want to use any RAID functionality of the…
b00ster
  • 1
  • 3
0
votes
1 answer

Enabling Temperature Support on LSI MegaRaid Cards

I've got two IBM ServeRAID M5014 SAS/SATA Controller cards in two different machines. One reports drive temperatures, the other does not. I am hopping that it is some type of megacli option that I can set. However, I have looked throughout the…
Squid
  • 19
  • 1
  • 4
0
votes
1 answer

RAID: replacing a disk before it fails

We have a RAID 5 setup (Megaraid SAS ROMB) with 4 930 Gb physical disks running as a 2.7 TB VD. Recently (a few months back) we had a drive fail and had to leave it in degraded mode for ages (various factors, wish we didn't but it's not in the scope…
Chris O'Kelly
  • 296
  • 6
  • 19
0
votes
1 answer

How to find out the amount of sectors available in a RAID physical disk for replacement?

So, to start with, let me confess I have no knowledge of RAID besides what I read in a few APC mags 5 years back and what the acronym stands for. Everything I know now comes from assumptions and the past day's research. We have a LSI MegaRaid array…
Chris O'Kelly
  • 296
  • 6
  • 19
0
votes
1 answer

Megaraid Firmware fault

After building a new server (IBM X3550). Getting error Firmware is in Fault state: MFI register state 0xF0FF2102. -- For this one could not get any help in google. And on the BIOS system setting getting the message: Driver Health Protocol: Missing…
chandank
  • 847
  • 3
  • 14
  • 31
0
votes
1 answer

Megacli check returns "OK;NRPE: Unable to read output"

There is an icinga server set up to run check_megaraid_sas. It has been working beautifully for the last ~7 months. During this time several "Unable to read output" messages have shown up for a variety of reasons, and in all of those cases the…
isaaclw
  • 123
  • 7
0
votes
3 answers

MegaRAID Storage Manager Error 1920 "Service MRMonitor (MegaMonitorSrv) failed to start." on Windows Server 2003 R2 x64

I'm trying to install the MegaRAID Storage Manager 8.10 provided by SUPERMICRO, but I keep getting an error 1920 that "Service MRMonitor (MegaMonitorSrv) failed to start. Verify that you have sufficient privileges to start system services." I'm…
Gup3rSuR4c
  • 661
  • 3
  • 14
  • 29
1 2 3
…
13 14