Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [megaraid]

200 questions
0
votes
1 answer

IBM x3650 accidentally deleted RAID5 Virtual Drive

I've got an IBM x3650 M3 server that I inherited. It's got 6 physical disks with RAID 5 using 0,1,2,3 and RAID 1 using 4,5. Disk 3 has failed and now I'm getting 'Hard Disk 0 failed' and I can't even boot into the OS (Ubuntu). To make matters…
Dirk Pitt
  • 1
0
votes
0 answers

High Availability with the Supermicro SMC2208 (MegaRAID)

I haven't been able to find a solid answer in the documentation, nor from the vendor since this model is out of production. We have a Supermicro SMC2208 24-drive-bay RAID. I would like to create a highly available environment with this existing…
BurningKrome
  • 525
  • 2
  • 12
  • 22
0
votes
1 answer

ServeRAID M5110 - does enabling T10-PI Data Protection require recreating all raid arrays?

The raid controller and drives seem to support T10-PI Data Protection information ('Type2'). It is currently disabled on the controller, and the MSM Ui doesn't show an option to enable it, but it is there in StorCLI.exe. Let's say I enabled this…
theultramage
  • 413
  • 1
  • 5
  • 15
0
votes
0 answers

parted and fdisk not showing new size after expanding a RAID 1 volume (Proxmox/Debian)

Background: I need to extend a RAID 1 volume from a live Proxmox/Debian server that has a LSI SAS 2108 MegaRAID card, from 1TB to 2TB, I did this on a test environment albeit it was with a different Raid card, and my procedure was replacing each…
ItsJustMe
  • 1,001
  • 1
  • 8
  • 10
0
votes
1 answer

MegaRAID: what does yellow "r" on drive icon mean?

One of our drives has a yellow square overlay on its icon in the Drives list. I think there's an "r" in the square (see image). I can't find this described in the MegaRAID manual anywhere. When I view drive properties while flipping back and…
mph
  • 103
  • 1
  • 3
0
votes
2 answers

Importing Foreign Drive with Megaraid Webbios

I've recently acquired an old server and decided to set it up as a home server. Having never set up a server before, I accidentally cleared a foreign configuration that kept two of my drives on it. Now those two drives are marked as foreign and I…
Jonathan Marple
  • 1
  • 3
0
votes
0 answers

Add disk to virtual drive using MegaRaid Storage Manager

I have a RAID 5 setup on an LSI 9361-24i with three virtual drives and six physical disks. When I setup the arrays one of my disks was dead on arrival and I had to do an RMA with Western Digital, but the system had to go live that week so I went…
Robert Petz
  • 545
  • 1
  • 5
  • 9
0
votes
0 answers

RAID Controller Firmware Issue

Background: I'm a Linux newbie with very limited knowledge, I wanted to build a RAID 10 for our startup after experiencing a complete loss of several terabytes of data from Dropbox recently. Setup: I spun up an Ubuntu 16.04 (Desktop) machine and…
Alex Iravani
  • 1
0
votes
1 answer

Expanding Logical Disk on Fujitsu Primergy T150 S7 running Serverview

We have a Fujitsu Primergy T150 S7 with an LSI based D2616 RAID controller with a logical drive running on two 146GB SAS drives and RAID 1. We need to expand the logical drive, so we bought two new 600GB drives. We're having some problems with the…
Chrizmo
  • 161
  • 1
  • 8
0
votes
2 answers

megacli unconfigured(bad) disk status

megacli tell me, there is an issue with one of my disk. Howerver, I am not sure that this disk actually exist. Here is megaclisas-status info : -- Controller information -- -- ID | H/W Model | RAM | Temp | BBU | Firmware c0 |…
Inglebard
  • 153
  • 3
  • 7
0
votes
0 answers

Identification of a Failing Drive on a PERC H700

I need some expert assistance. I have home LAB ESX box where I'm using a Dell PERC H700 raid card with RAID 6 on ports 0-5 & RAID1 on ports 6-7. The last few nights when my backups run I get several errors as below: Controller ID: 0 Event From :…
Zenonk
  • 56
  • 5
0
votes
1 answer

Hard disk is not detecting in Lenovo Thinkserver RD450

We bought a new Lenovo ThinkServer RD450 rack server. It has two numbers of 1 GB hard disk. We configured the RAID 1 in the server, and then we started the Debian Jessie OS installation. During the installation, hard disks are not showing in the…
muruga
  • 121
  • 1
  • 2
  • 6
0
votes
1 answer

RAID 6 array rebuild with hotspare

I have an 11-disk (D0 - D10) RAID6 array with a hotspare (D11) - a 12 disk array total. Disk D3 failed earlier today and the hotspare is now being rebuilt (presumably, turning itself into a datacopy of D3). I want to replace the dead D3 with a…
Alex
  • 451
  • 1
  • 5
  • 15
0
votes
0 answers

virtual drive degraded replacement hard drive not found in MegaRAID on Lenovo ThinkServer

Running MegaRAID Storage Manager 16.02.00.04 on a Windows 8.1 Lenovo ThinkServer M 3817 server. Bay 1 had a yellow blinking light so I purchased a replacement and inserted it and after a reboot it's still blinking yellow. Before removing the old HD…
RobbieTheK
  • 400
  • 6
  • 18
0
votes
1 answer

Debian installation on MegaRaid SAS 9266-4i

I have server here, with Intel Xeon CPU on Intel MB and with MegaRAID SAS 9266-4i. I need completely reinstall this server, however I'm not able to see this raid in Partition manager. Tried to load drivers in installer but probably in bad way. What…
tomis
  • 121
  • 4
1 2 3
…
13 14