Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [lsi]

LSI is a manufacturer of enterprise storage and networking components.

LSI is a manufacturer of enterprise storage and networking components.

250 questions
4
votes
1 answer

Consistency Check inconsistency logging disabled, too many inconsistencies on VD: 0

We recently purchased an LSI MegaRAID 9266-8i SAS RAID card to replace a failed card in our NAS. Setup of the card went smoothly, I updated the firmware, set up RAID6 with hotswap, and let it initialize. Every so often (once a week or so?) we get…
user1143682
  • 151
  • 1
  • 3
4
votes
3 answers

How to understand the LSI HBA connector specs?

When reading the specifications for the LSi SAS 9206-16e HBA, it says Storage Connectivity; Data Transfer Rates * 16 ports; 6Gb/s SAS 2.1 compliant SAS Bandwidth * Half Duplex 2400MB/s, x4, 6Gb/s SAS lanes Port Configurations * 16 ea, x1 ports…
Sandra
  • 10,303
  • 38
  • 112
  • 165
4
votes
2 answers

megaraid: Logical Drives at different RAID levels

I am currently using a SuperMicro machine that has an on-board LSI 2208 controller (MegaRAID class). I want to create a single array from two drives and then carve that up into: one RAID1 100GB logical drive one RAID0 logical drive taking up the…
slappyjam
  • 75
  • 6
4
votes
4 answers

Severe write performance problem

[Sorry, I tried to stay short but it just was not possible] I'm running Linux 2.6.22.19 with linux-vserver 2.3.0.34 on a Fujitsu Siemens Primergy RX200 S3 for development purpose. Intel(R) Xeon(R) 5140 @ 2.33Ghz with 4GB RAM (where mostly 500MB are…
mark
  • 1,516
  • 5
  • 21
  • 33
4
votes
1 answer

Monitor LSI MPT disk status

I have some servers with RAID arrays based on LSI Logic MPT chips (specifically the SAS1068E). Currently the only way I'm aware of to get the disk status is to use the lsiutil program and view the status there interactively. I'd like to be able to…
Kamil Kisiel
  • 12,184
  • 7
  • 48
  • 69
4
votes
2 answers

Where to get storcli64 for Linux from LSI MegaRAID now that Broadcom has taken over?

I need the Linux shell interface, storcli64 for the Dell PERC H700 (aka LSI MegaRAID) as explained here and here, but the download links all appear to be defunct. How can I get the appropriate files now for Linux (specifically Proxmox 6.1 with…
ylluminate
  • 1,155
  • 2
  • 17
  • 35
3
votes
1 answer

6 Samsung 860 EVO SSDs running RAID-10 with an LSI-9260 controller TBW

I am getting ready to implement a RAID-10 config with 6 Samsung 860 EVO 500gb SSDs. They will be attached to an LSI 9260-8i controller. The specs for the SSDs lifespan read 300TBW. Q1 - Can anyone verify if I would be correct to say that the…
crb314
  • 33
  • 3
3
votes
0 answers

All disks show as Unconfigured Bad (UBAD) on RAID controller

Before starting, I will say I would appreciate help but really I need to hear from someone that has experienced this issue and how they solved it because the obvious and go to solutions are not working (believe me I have tried for a week). With that…
ATtheincredibleaf
  • 183
  • 1
  • 7
3
votes
1 answer

How do I remove a failing disk from a LSI MegaRAID disk group?

One of the disks in group 0 (EID:Slot 252:4, DiskID 12) is starting to fail it's smart tests: 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1837 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age…
Aaron Digulla
  • 974
  • 3
  • 15
  • 25
3
votes
3 answers

ESXi 6.7 monitor hardware storage not showing usual results

Yesterday 2 of our ESXi hosts were updated from 6.5 to 6.7 (build 8169922), though after doing this we noticed a few quirks when trying to access the storage hardware monitoring. In the web UI typically we'd only see elements listed for the…
Adambean
  • 153
  • 1
  • 1
  • 9
3
votes
0 answers

How to identify disk make and model attached to a MegaRAID controller?

I have a system with a LSI MegaRAID SAS 9271-4i and some attached disks in a RAID 10 configuration. I don't have physical access to the system but I have root access via SSH. Various tools - lspci, lshw, lsscsi, smartctl - are only able to show me…
Jean-Paul Calderone
  • 362
  • 1
  • 4
  • 14
3
votes
2 answers

StorCLI: storcli show and "Hlth: Opt": how exhaustive is this?

I'm working on a script using StorCLI (Ver 1.21.06). When I run: ./storcli show I get (abbreviated): Status Code = 0 Status = Success As well as: Hlth: Opt Q1. I'm curious to know what the Status/Status code actually means: does this have…
gravyface
  • 13,957
  • 19
  • 68
  • 100
3
votes
3 answers

Which drive in RAID has bad sectors?

I have 4 physical drives in a single virtual drive using an LSI MegaRaid SAS controller. It seems (at least) one of the drives has bad sectors because: io errors occur when attempting to back up some files running badblocks reports some bad…
James
  • 325
  • 2
  • 11
  • 22
3
votes
1 answer

Convert single disk raid0 to raid1 on an LSI megaraid controller

I have a server with an LSI Megaraid raid controller which has a single disk for the OS configured in raid0 What i want to do, is add a second brand new disk for redundancy and convert the raid0 to raid1 without losing the data on the first disk Is…
Antony Matsoukas
  • 91
  • 1
  • 5
3
votes
0 answers

mpt2sas failure fills syslog

I have a strange error message in the logs, which started like this: :39:35 host1 kernel: [54674279.243416] mpt2sas0: fault_state(0x2651)! :39:35 host1 kernel: [54674279.243543] mpt2sas0: sending diag reset !! :39:36 host1 kernel: [54674280.481215]…
Roman Susi
  • 141
  • 5
1 2
3
…
16 17