Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [lsi]

LSI is a manufacturer of enterprise storage and networking components.

LSI is a manufacturer of enterprise storage and networking components.

250 questions
0
votes
1 answer

How to enable SAS-12 on LSI 9361 RAID controller

By default, this SAS-12 controller runs with SAS-12 SSDs at SAS-6 speeds. How to unlock SAS-12?
GregC
  • 889
  • 2
  • 8
  • 25
0
votes
2 answers

Getting an LSI SAS1064e to recognise new drives

I have an IBM x3200 M3 server running SBS2011. This server has an LSI SAS1063e controller (the basic BR10il RAID controller that comes with that system). Already existing was a RAID1 array of two 500GB SAS drives. I have inserted two 2TB WD Red…
Jack Scott
  • 155
  • 2
  • 6
0
votes
2 answers

Possible to put larger disks in LSI arrays?

I have a couple of these LSI arrays LSI Model: 0834 LSI Class: 3600 LSI Name: LSI Engenio LSI product name: 1932 LSI Product codename: Mary Jane Enclosure name: Shea (DM1300) End of Life: 31-Dec-2010 which was bought with 2TB disks. My plan is to…
Jasmine Lognnes
  • 2,520
  • 8
  • 33
  • 51
0
votes
2 answers

LSI MegaRaid live conversion from RAID 6 to RAID 0+1

I've currently got a lovely working server that has an LSI 9265-8i RAID card in it with 4x1TB RE4 drives, also running CacheCade Pro 2.0 with 2x180GB SSDs in RAID1. I currently have the main array running on RAID6, as much as I like it. I think…
Chrisjc
  • 27
  • 1
  • 3
0
votes
1 answer

How to perform disk test attached to LSI RAID controller

I have four Seagate ST33000657 SAS drives attached to LSi 9260-4i controller. I want to test them for hw errors and bad sectors, before launching into production. I ve tried SeaTools, but it's not working with SAS drives. Is there any way to do this…
powerthrash
  • 49
  • 1
  • 2
  • 8
0
votes
1 answer

LSI Megaraid 150-6 as regular SATA controller

I have an old but reliable server board that does not have any SATA ports on it. Also i have LSI Megararaid 150-6 (with latest firmware) which i want to use as ordinary "dumb" SATA controller. I don't want to use any RAID functionality of the…
b00ster
  • 1
  • 3
0
votes
1 answer

How to address a recurring low temperature error seen at every boot-up?

After updating to latest controller firmware, I started receiving the following error messages: LSI 2208 ROC: Temperature sensor below error threshold on enclosure 1 Sensors 5 thru 7 Is this something I should worry about, or is it a Red…
GregC
  • 889
  • 2
  • 8
  • 25
0
votes
2 answers

Very Slow Virtual Disk I/O, LSI_SCSI Warning on P2V W2K3 64-Bit VMWare Guest

I did a P2V conversion of a production server (W2K3R2 64-bit) a while back using the VMWare conversion tool. I then installed the free VMWare Server 2.0 product on a Windows server, and am able to boot and interact with the VM guest. My purpose…
Brian Spolarich
  • 227
  • 1
  • 4
  • 12
0
votes
1 answer

How can I grow a 3Ware 9650SE RAID1 under ESXi 5.0?

Thanks to this question I've now got my ESXi 5.0.0 (Build 623860) running/booting off a physically enlarged 9650SE controlled RAID1 array. The 1TB drives had been replaced with 2TBs; I'd like to logically expand the array but don't have the tx_cli…
Jamie
  • 1,284
  • 7
  • 22
  • 40
0
votes
1 answer

How to find out the amount of sectors available in a RAID physical disk for replacement?

So, to start with, let me confess I have no knowledge of RAID besides what I read in a few APC mags 5 years back and what the acronym stands for. Everything I know now comes from assumptions and the past day's research. We have a LSI MegaRaid array…
Chris O'Kelly
  • 296
  • 6
  • 19
0
votes
1 answer

LSI 2208 9286-8e MegaRAID controller beeping when connected to 24-bay NexentaSTOR JBOD enclosure

I am getting beeping from the LSI external RAID controller even if I properly shutdown and there is no array re-initialization. Would I be required to use a battery back (BBU) with the LSI controller if it's driving an external enclosure with an…
GregC
  • 889
  • 2
  • 8
  • 25
0
votes
1 answer

All paths down on vSphere esxi 5.1, LSI 9211-8i

Works 100% ESXi 5.1 HBA (LSI 1064e) > 1x SAS2 100GB SSD Doesn't work ESXi 5.1 HBA (LSI 9211-8i IT /IBM M1015) > 1x SAS2 100GB SSD After a few hours of heavy HD load i get: - Device or filesystem with identifier ['all drives'] has…
user1434058
  • 89
  • 1
  • 1
  • 6
0
votes
2 answers

Dell 2970 - HP 1/8 G2 autoloader keeps falling off LSI 2032 SCSI chain

I've a somewhat irritating problem with a Dell 2970 that has a HP 1/8 G2 autoloader (the Ultrium LTO 2 model) attached to the Dell/LSI 2032 non-RAID SCSI card. In essence, sometimes the autoloader/drive completely fails to appear on the SCSI chain…
John Parker
  • 133
  • 9
0
votes
3 answers

MegaRAID Storage Manager Error 1920 "Service MRMonitor (MegaMonitorSrv) failed to start." on Windows Server 2003 R2 x64

I'm trying to install the MegaRAID Storage Manager 8.10 provided by SUPERMICRO, but I keep getting an error 1920 that "Service MRMonitor (MegaMonitorSrv) failed to start. Verify that you have sufficient privileges to start system services." I'm…
Gup3rSuR4c
  • 661
  • 3
  • 14
  • 29
0
votes
1 answer

Why can't add a hot spare in freebsd? Can anybody help me fix it?

Why can't add a hot spare? # mfiutil add e1:s1 mfid0 mfiutil: Drive 1 is not available I found the reason is e1:s1 is marked online, it must be Marked as an unconfigured good drive, and to mark that it must not be part of an existing array. Then…
hamlet
  • 3
  • 3
1 2 3
…
16 17