Questions tagged [ipv6]

IPv6 is the successor to IPv4. Rather than 2^32 addresses (like IPv4), it has 2^128, which is 340,282,366,920,938,463,463,374,607,431,768,211,456 unique addresses (34 undecillion). IPv6 addressing is quite different to IPv4 and is not backwards compatible, but protocols that sit on top (HTTP, SSH, etc) remain unchanged.

was designed in the 1970's and supports just over 4 billion unique addresses. Back then, nobody could ever have imagined the internet becoming what it is today.

Since 1 February 2011, the global pool of IPv4 addresses has been depleted, The first regional pool (Asia) ran out on 15 April 2011, Europe ran out on 14 September 2014, with the North American pools slated to run out in. Individual ISPs and hosting companies should have between three and twelve months after their regional pool is empty. By 2014, it will be hard/expensive to get a new IPv4 allocation outside of Africa and Latin America.

In the early 1990's people started to realise that we were going to run out of IP addresses and a taskforce was developed to decide on a new protocol. The protocol that was settled on was IPv6.

IPv6 has 128-bit addresses, and mostly works the same as IPv4, except that ARP is completely replaced (by Neighbour Discovery Protocol), and DHCP is radically different - and may not be necessary, in the light of the new Router Advertisement system. With the much larger address allocation, NAT is not needed.

There is an excellent talk from DefCon 18 on youtube that explains a lot of the history around IPv6. You can find it here.

1755 questions
0
votes
1 answer

lighttpd does not start at boot after enabling ipv6

A few days ago I configured lighttpd to listen on my VPS IPv6 address as well. It runs on a Debian 7 Xen VPS (Linode) with a 3.15.4-x86_64-linode45 kernel. The version of lighttpd is 1.4.31-4+deb7u3. My lighttpd.conf used this configuration to…
noaru
  • 3
  • 2
0
votes
1 answer

ipv6 reverse dns not working unless +trace is specified

I'm trying to set up reverse dns for ipv6 in my lan. The dns server which should be delegated is at 2001:5c0:1400:b::9 and an host for which RDNS should work is at 2001:5c0:1500:300::1. The problem is, dig -x doesn't seem to work unless +trace is…
Alberto
  • 29
  • 5
0
votes
1 answer

IPv6 configuration - cannot ping

I am trying to configure IPv6 network first time in my live. I have got on my main server following interfaces: br1 Link encap:Ethernet HWaddr 66:ea:5c:99:08:f5 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6…
Marek
  • 113
  • 1
  • 1
  • 6
0
votes
1 answer

XEN virtual machine with IPv6 but without IPv4

How should I create a new virtual machine using xen-create-image if I just got the IPv6 from my hoster? When I tried xen-create-image --hostname=s1.example.com --size=70Gb --swap=8Gb --memory=4096Mb --arch=amd64 --role-udev…
Marek
  • 113
  • 1
  • 1
  • 6
0
votes
2 answers

Server 2012 Obtaining DHCPv6 Address, but has static configuration

This is very similar to the problem I had with 2008R2 (Win2k8R2 Obtaining DHCPv6 address, but has static configuration), but that solution doesn't work with 2012R2. The box is a new 2012R2 domain controller, with a teamed interface to our LAN (where…
fukawi2
  • 5,396
  • 3
  • 32
  • 51
0
votes
1 answer

IPv4 Nating and IPv6 Bridging

We have only 5 usable static IPv4 IPs and many IPv6 static IPs. We want Multiple nodes/pc to be connected with Internet using nating/router because we have limited number of IPs. We would still want few nodes with static public IPv4 IPs. All nodes…
Jai
  • 141
  • 1
  • 3
  • 14
0
votes
2 answers

ip6tables drop connections after request on port 80

I have little problem with my Ip6tables. When i apply rules bellow, so everything is fine. After I try http via webpage, all ok. After I will return to SSH try and ssh is disonnected and browser dont reply via ipv6 after. When I stop ip6table,…
Pavel
  • 417
  • 1
  • 7
  • 17
0
votes
4 answers

is it possible in this case to get two IPv6 networks to communicate over the IPv4 Internet?

I have a setup of a laptop connected to a cellular IPv4 network (3G usb dongle) and PC connected to another IPv4/IPv6 network. Both have been configured to run as IPv6 routers and each has its IPv6 network. The laptop connects to the Internet via…
0
votes
1 answer

ipv6 : why ndp resolves to global scope address?

I'm facing a strange ipv6 behavior and I don't know how to solve it because I'm not familiar with ipv6. Maybe this behavior is normal. I hope that you will help me. ( I'm running under debian 6.0.9 with a custom kernel 3.2.58 ) machine A is…
Julien
  • 133
  • 4
0
votes
0 answers

No IPv6 traffic in bridge mode

Hello happy people o/~ yesterday I had the audacity to reboot a remote Linux server. This Ubuntu 64, 12.04 installation went from kernel 3.11.0-19-generic to 3.13.0-32-generic and also from being able to talk over both, IPv4 and IPv6 to being able…
0
votes
1 answer

Ubuntu 12.04 services using ipv6

I currently manage two servers on Linode. The first "server-a" is running 12.04, the second "server-b" is a fresh install of 14.04. A while ago I had some trouble with spf records on server-a and came to the realization that I needed to explicitly…
0
votes
3 answers

Dual-Stack Lite and FTP connection via IPv4 - How?

my original question: FTP client/server failing on switching to PASV mode Based on that, I would like to know if/how I can open a FTP connection from a computer that is inside a ISP's network that uses Dual-Stack Lite to a FTP server that is only…
Steffen Winkler
  • 259
  • 1
  • 4
  • 15
0
votes
1 answer

Configure IPv6 on FreeBSD webserver

Seems I just can't nail the right rc.conf configuration for IPv6 on my FreeBSD 10 VPS. I'd like to go completely IPv6 and tutorials/instructions i followed aren't really working for me somehow. It's just a basic, minimalistic web server VPS with one…
dzhi
  • 800
  • 3
  • 10
  • 26
0
votes
1 answer

Ubuntu IPv6 port redirect using ufw

I'm trying to configure port redirection from port 80 to 8080 on server with both IPv4 and IPv6 support. The OS is Ubuntu 14.04 with the 3.2* series kernel. It is a production server, so I don't want to upgrade kernel. I'm using UFW as a firewall…
j0hny
  • 175
  • 1
  • 2
  • 9
0
votes
1 answer

Odd multicast messages during IPv6 autoconfiguration

So I am trying a little autoconfiguration on some virtual machines while observing what happens in wireshark and trying to understand what how it works, step by step. This is how any of those captures looks. I can see the router solicitation and…