Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [hp]

HP (Hewlett-Packard) is a server and network equipment manufacturer. This is a generic tag to be used when discussing HP hardware or software with no more specific tag available - See the list in the main tag wiki.

HP (Hewlett-Packard) is an American company encompassing multiple brands and product lines, including servers, network equipment, storage equipment, workstations, components, and consumer electronics.

HP has acquired several major industry names in computing, including Compaq and 3Com.

Wherever possible a more specific tag should be used. For example:

,

1513 questions
5
votes
2 answers

Differences between HP and EMC SAN

I've managed Dell's EMC and Equallogic SANs in the past. I was recently put in charge of a Hewlett-Packard P2000 SAN. HP and EMC use slightly different terminology. I'd like to confirm I understand HP's terminology. Can you verify/correct some of…
Michael Cornn
  • 269
  • 3
  • 16
5
votes
1 answer

Recovering data from a failed SAS drive? (RAID0...yes, I know)

We have a HP DL360 server with a P400 controller, which has two 72GB 10K SAS drives in a RAID 0 configuration (yes, I know...RAID 0). The HP Model number for the drives is DG072A8B54 Recently, one of the two drives appear to have failed, and is no…
victorhooi
  • 515
  • 3
  • 11
  • 20
5
votes
2 answers

HP ProLiant MicroServer Gen 8 - Hard Drive Configuration?

I have a HP ProLiant MicroServer Gen 8 box. I installed a 4tb drive and created a simple array. The raid controller saw the entire drive. I then used IP 6.1 to install Windows Server 2012 Standard. IP only created a 2TB partition. I though no big…
DevNULL
  • 161
  • 1
  • 1
  • 7
5
votes
6 answers

VMware ESXi error upon boot "Relocating modules and starting up the kernel"

Coming back from a 4-day weekend, I noticed the A/C had been turned off for the duration of the long weekend and the heat was around 80-82 degrees. The HP ProLiant DL185G5 was running but the system fans were running at full RPMs but the system…
Brandon
  • 109
  • 1
  • 1
  • 4
5
votes
1 answer

HP Proliant G6 reporting failed SSD drive - alternative strategies for monitoring?

I would like to get your feedback about a controversial situation I found myself in some days ago. I was tasked to use a HP Proliant G6 for development purposes with 2 new (< 2 months, never used before) non-HP SSDs used in RAID1 configuration. They…
Deim0s
  • 172
  • 7
5
votes
1 answer

CentOS 7 x64 and HP Proliant DL360 G5 SCSI Controller compatibility

I've an HP Proliant DL360 G5 server with two 72gb HDD in RAID and 2 150gb HDD in RAID. I've Windows Server installed on the 72gB HDD and I'm now trying to overwrite it with a fresh installation of CentOS 7 x64. When I try to install it it says that…
Fez Vrasta
  • 196
  • 1
  • 3
  • 9
5
votes
1 answer

ESXi v5.5 is having random crashes

HW: Type: HP Proliant ML350 G5 RAM 22GB CPU 1 x Intel Xenon E5405 2.00GHz OP: ESXi 5.5 just updated from 5.1 to try and fix the crashes occurring on ESXi 5.1 on same hardware. I'm trying to find the error on why one of our servers is crashing, it…
Darkmage
  • 323
  • 3
  • 12
5
votes
2 answers

How can I monitor HP P410 hardware RAID degraded in Freenas

I would like to run freenas on a HP P410 hardware RAID 5 4x600GB 15k SAS array and be alerted in the case of physical disk failure, however the freenas documentation says: to prevent problems, do not enable the S.M.A.R.T. service if your disks…
Andy Joiner
  • 1,273
  • 1
  • 10
  • 24
5
votes
3 answers

HP ProLiant DL380 G7 servers will not POST

We have just received 2 HP DL380 G7's from our DR site. They have been running fine at the site for some time but we have tried to power them up in our DC and they will not post. We get a very brief flash of the post screen and then the systems…
user3045672
  • 67
  • 1
  • 2
  • 5
5
votes
1 answer

HP MSL2024 LTO6 2 Drive & HP ProLiant DL180 G6

Wanted to get some insight on setting up the below. I have an existing backup server: HP ProLiant DL180 G6 running Windows Server 2008 R2 Standard 64-Bit & Backup Exec 12.5. And recently purchased a HP MSL2024 2 Drive LTO6 Library. It comes with…
Andrew Luu
  • 51
  • 2
5
votes
1 answer

Tag/Untag VLANs from Port Perspective on HP Switch

I'm familiar with vlans and tagging, and we usually use the command line interface for our HP Layer 3 switches. I've done quite a few: vlan 10 untagged 21 I've always wondered if this was possible to do from the perspective of the port. For…
SteadH
  • 666
  • 3
  • 16
  • 33
5
votes
1 answer

HP Proliant ML350 G5 SAS HDD

I am getting problem in HP Proliant ML350 G5. Some few days back one of the SAS HDD failed. It was 146GB SAS 15krpm HDD. We got new one which is 146GB SAS 10k rpm HDD. Its on RAID 1(1+0) configuration. We replaced the SAS HDD but its not…
Gurpreet Singh
  • 51
  • 1
  • 2
5
votes
2 answers

DL385 G2 powering off after some time

I have one DL385 G2 server that since Thursday is not able to power on properly. I can't figure out what's the problem, since there is no indication neither in iLO 2 log, IML, nor any red/amber LED on the front panel. Sometimes it can boot to the…
Peter Dian
  • 53
  • 1
  • 3
5
votes
1 answer

RAID Recovery after Firmware issue

This may be a duplicate but I think the situation is different. We were having problems with a HP MSA2000 SAN, speaking to support they suggested that we upgraded the firmware to the latest version and clear out one of the VDISKS which had a…
boburob
  • 1,174
  • 8
  • 23
5
votes
2 answers

HP DL380 G6: Where is Temperature Sensor 30 (I/O Board Zone)?

In ILO2 firmware 2.15 on my DL380 G6, the Temp 30 sensor (location: I/O Board Zone) indicates 65C and my fans are running at 78% capacity. The Caution level for this zone is 110C, and the Critical level is 115C. Would anyone know where is located…
Alexandre Vovan
  • 59
  • 1
  • 1
  • 2
1 2 3
…
99 100