Questions tagged [firmware]

This tag is for questions related to the ROM BIOS of a computer, which may contain only elementary basic functions of a device and may only provide services to higher-level software. Firmware such as the program of an embedded system may be the only program that will run on the system and provide all of its functions.

Firmware such as the ROM BIOS of a personal computer may contain only elementary basic functions of a device and may only provide services to higher-level software. Firmware such as the program of an embedded system may be the only program that will run on the system and provide all of its functions.

Reference

https://en.wikipedia.org/wiki/Firmware

160 questions
2
votes
1 answer

Incompatible drivers on IBM SAN due to different firmware. Can I flash it?

I had to change a drive in my IBM DS3512 SAN, I bought it by model (Seagate model) and not by IBM FRU code. I tried to put the drive but it fails with error "incompatible drive". I saw that the model is really the same of other drives but firmware…
Tobia
  • 1,272
  • 9
  • 41
  • 81
2
votes
1 answer

Offline firmware upgrade DL360 G7 & DL185 G5

We have just received two used HP ProLiant servers for community use and I need advice on where to find offline firmware update ISOs like those from Dell repositories. (My background is Dell) The ISO's are needed for the following: HP ProLiant…
Fab
  • 159
  • 1
  • 2
  • 10
2
votes
1 answer

PERC 5/i firmware on DELL PowerEdge 2950 cannot be updated

My DELL PowerEdge 2950 (Windows Server 2008 R2) OpenManage shows this warning. Firmware version is out of date. Firmware Version 5.0.2-0003 Minimum Required Firmware Version 5.2.2-0072 I installed this Windows update package from DELL. It…
2
votes
2 answers

Is using beta dd-wrt firmware safe?

I upgraded from v24-sp1 (2013) to v3 beta (september 2015) as dd-wrt stable releases haven't been updated for two years. Are there any issues I should be aware of when using the beta builds? I need it for openvpn in our company.
SkyHiRider
  • 213
  • 1
  • 3
  • 8
2
votes
1 answer

A large number of JetDirect firmware updates - what issues do they address?

HP recently released a large number of firmware updates for JetDirect devices. There is no changelog provided. Curiously, many obsolete (e.g., 802.11b) devices are in the list, and the last time a firmware update was provided for some of these was…
Parker
  • 773
  • 2
  • 11
  • 27
2
votes
3 answers

What are the procedures for upgrading a ProLiant ML370 G5 firmware REMOTELY? I'm thinking via its iLO, and if so, where do I access to do the upgrade

What are the procedures for upgrading a ProLiant ML370 G5 firmware REMOTELY? I'm thinking via its iLO, and if so, where do I access to do the upgrade. Firmware files are already on the server's C: drive.
Peter
  • 29
  • 2
2
votes
1 answer

.DLL error when installing firmware for Dell PE2900 PERC 5/i RAID

I'm installing a new RAID firmware version (2.5.0) for a Dell PE2900 which has a PERC 5/i RAID setup. When I run the installer, it gives the message "The procedure entry point RegDeleteKeyExA could not be located in the dynamic link library…
DaWolfman
  • 41
  • 1
  • 3
2
votes
1 answer

Upgrading Firmware on LSI 9211-4i to IT

I've been trying to get my LSI SAS 9211-4i moved over to IT mode. But I cannot for the life of me get it erased so I can flash the IT firmware to it. I've tried using FreeDOS (from the website) and FreeDOS off of UBCD (tried every single different…
Austin Harsh
  • 51
  • 2
  • 5
2
votes
1 answer

Firmware and drivers upgrade for HP Smart Array E200i controller

What is the recommended way to upgrade firmware and drivers for HP Smart Array E200i controller on HP Proliant BL460c G1? Is it better to boot from a Maintenance CD or install directly from the OS?
2
votes
2 answers

How to view HP Smart Array firmware version on HP Proliant BL460c blade server

What is/are the quickest way(s) to view firmware version for HP Smart Array (preferably GUI version)? Should I look for it in Windows or it can be viewed via the iLO?
2
votes
0 answers

Updating OpenBoot PROM on Sun Fire v440

After i have updated ALOM firmware on Sun Fire v440, i decided to update OpenBoot PROM, but when i try to load the patch using boot disk /flash-update-SunFire440 i get: SILO Fatal Error: Multiple loadable segments in your ELF image Program…
hraphrap
  • 237
  • 2
  • 16
2
votes
4 answers

Dell OpenManage says my firmware is too old?

My Dell OpenManage Server Administrator application has an alert and is telling me my firmware (and driver?) versions are not high enough. Should I be concerned / what issue might this cause? I believe it has been running this way for a LONG…
Scott Szretter
  • 1,882
  • 11
  • 43
  • 66
2
votes
1 answer

LaserJet M1522nF firmware was corrupted during the update

I have a LaserJet M1522nF, and the problem when I working on is that it is freezing every time so I decide to update the firmware. During the updating the device was down because of electricity so I turned it on again and there is a message on the…
AAA-Super
  • 133
  • 1
  • 2
  • 9
2
votes
5 answers

Debian Squeeze and RAID firmware after kernel update

I've installed Debian Squeeze on my server several days ago. During install process installer asked me to provide USB flash drive with firmware aic94xx-seq.fw (file disappeared likely due to licensing, you can find it on adaptec site:…
Dmytro Leonenko
  • 456
  • 1
  • 7
  • 24
2
votes
1 answer

Dell Power Edge Diags and Firmware Updates from a WinPE environment

I am looking for a way to upgrade all firmware on Dell PE servers from within a WinPe environment. We are a reseller and I already have an environment set up to transfer ownership of the servers to our company. I would also like to be able to run…