Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [firmware]

This tag is for questions related to the ROM BIOS of a computer, which may contain only elementary basic functions of a device and may only provide services to higher-level software. Firmware such as the program of an embedded system may be the only program that will run on the system and provide all of its functions.

Firmware such as the ROM BIOS of a personal computer may contain only elementary basic functions of a device and may only provide services to higher-level software. Firmware such as the program of an embedded system may be the only program that will run on the system and provide all of its functions.

Reference

https://en.wikipedia.org/wiki/Firmware

160 questions
0
votes
0 answers

Cisco UCS C220 M4 PSU Fault In Diagnostics

Hello fellow Sysadmins. A C220 M4 with the latest recommended firmware I am working on displays the following fault messages on latest version diagnostics at Server Health: PSU1 PSU1_PWRGD: Power Supply sensor for PSU1, State Asserted PSU2…
SandShriner
  • 13
  • 6
0
votes
1 answer

Flash Crucial SSD firmware through PERC 730P Mini RAID controller

We've got a number of Crucial drives in Dell r630 servers with PERC 730P Mini RAID controllers that need their firmware updating as they're still on version M3CR032 with the known issues. The servers aren't live so there is always the option of…
willdashwood
  • 103
  • 1
  • 1
  • 5
0
votes
1 answer

Cannot find/update firmware for IBM x3650 M2

I am trying to revive an old IBM x3650 M2 server, but am running into trouble with IMM/IPMI related to the FW being almost as old as the server itself. Server is from 2010, firmware is from '09 (UEFI) and '11 (IMM/DSA) and is running ESXi. I checked…
Incitu_MJ
  • 3
  • 1
0
votes
0 answers

Checkmk snmp_extended_info firmware data not shown in GUI

I m running Checkmk Raw Edition 2.1.0p4. I m trying to configure the HW/SW Inventory plugin to interrogate multiple appliances' firmware versions. The problem arrises with my Fortigate firewall. The firmware version is present in…
7lym
  • 1
  • 1
0
votes
0 answers

Show raid controller firmware version from Linux

I'm trying to find out the firmware version of my RAID controller on CentOS 7.9. Here is my RAID controller : # lspci -d::104 -m 02:00.0 "RAID bus controller" "Broadcom / LSI" "MegaRAID SAS-3 3108 [Invader]" -r02 "Dell" "PERC H730 Mini" # lspci…
SebMa
  • 359
  • 1
  • 10
0
votes
1 answer

LTO6 drive asking firmware update but does not accept it

I recently pulled an ibm LTO 6 fh fibre drive from a library and was using it in standalone mode in a windows 10 pc where I use other sas drives. It was working just fine. Yesterday I turn it on to run some backups and notice SCD code 4 on the…
satantango
  • 73
  • 5
0
votes
0 answers

Intel server board S1200v3RPS firmware upgrade, write protected

I have a Intel server board, S1200V3RPS and need to update its firmware. I download the latest bios (firmware). Boot into EFS Shell. And run the FvUpdate.efi program. But I got "Update failed. Please make sure the flash is not write protected." I…
Gerald Me
  • 1
  • 1
0
votes
1 answer

Defining IP Address for catastrophic DNS Failures - ILO / Lights Out Management

When a new server is plugged into a DHCP / dynamic network then it will get an IP. But I want to be sure that I can access this if the DNS goes down. Therefore I would assume I need to setup as a static IP right? I would think that the ideal…
LeeRuns
  • 109
  • 2
0
votes
1 answer

Is ingress filtering described in RFC2827 implemented in most routers? How does such implementation look like?

RFC 2827 describes the idea of ingress filtering that is meant to deal with DOS attacks that utilize IP spoofing: An input traffic filter on the ingress (input) link of "router 2", which provides connectivity to the attacker's network, restricts…
John Smith
  • 105
  • 3
0
votes
2 answers

How do I upgrade Firmware on Cisco SPA50X VOIP Phone?

I downloaded the latest Firmware for my Cisco SPA504G. However, the usual .exe file used to perform the upgrade was not bundled with new firmware. Nor did the release notes provide any clues about how to upgrade without it. The Web interface has no…
F1Linux
  • 355
  • 5
  • 12
0
votes
1 answer

Dell Poweredge R710 “System Services update required”

We just bought a refurbished R710 and upon trying to boot into the system services, it said that system services was disabled, so we booted into the iDRAC6 configuration utility and enabled the system services. Now, when we tried rebooting and going…
GNULinuxOnboard
  • 117
  • 8
0
votes
1 answer

cat an file programs fail to acess a file but vi works properly (Debian)

I have getting some problems with my system after a bad reset via ctrl+alt+del. Since then errors related to ACPI and ata6 are reported. Trying to get a solution to this (in a savage way:I am n00b), I started to test the contends in the directory…
Daniel Bandeira
  • 103
  • 4
0
votes
3 answers

I'm getting Permission Denied when redirecting output from CMD to a text file using the logitech_dfu tool

I've gotten this output using this command you see here from the Logitech instructions, and using the ">" operator before the file names in said command. It errors, and does not place anything in the output and error files. first it lists the…
Joe Bales
  • 21
  • 1
  • 4
0
votes
1 answer

Flash firmware on a Micron OEM SSD (P400m)

I have a 100 GB Micron P400m SSD from an EMC VMAX array. The sector size is 520 or 528 bits. I can identify the drive with everything via the tools from Micron, but it refuses to download the firmware or even upload. Is there a way to re-flash it…
tukan
  • 138
  • 6
-1
votes
1 answer

HP Smart Array 6i upgrade firmware on Ubuntu

How can I upgrade the firmware of my HP Array controller 6i? can I upgrade using hpacucli? or any other CLI utility? The server that I want to upgrade is a HP Proliant DL360 G4 with Ubuntu Server. Thanks.
Jos3k4
  • 129
  • 5
1 2 3
…
10
11