Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [cisco-vpn]

240 questions
0
votes
1 answer

Recently I configured a Site-2-Site VPN Tunnel and I'm getting this errors:

Recently I configured a Site-2-Site VPN Tunnel and I'm getting this errors: 3 Feb 27 2018 09:21:57 Tunnel Manager has failed to establish an L2L SA. All configured IKE versions failed to establish the tunnel. Map Tag= TTL_map. Map Sequence…
Salim Ibrohimi
  • 111
  • 1
  • 5
0
votes
1 answer

CISCO RV042G Gateway to Gateway - Forward WAN traffic to remote VPN LAN device

Two RV042G routers. Both use only the one WAN1 port. Cisco B is connected to the Internet on a 4g dynamic internet connection that is behind a (3rd party) NAT wall. Cisco A is on a public fixed IP address. Cisco B establishes the VPN connection…
John Styles
  • 1
  • 1
0
votes
1 answer

Add AWS VPN to Cisco ASA 5515x where a VPN to another office exist

Story: I have Cisco ASA 5515x in the HQ (10.9.1.0/24) connected via site-to-site VPN to office A [10.9.2.0/24 and 10.9.3.0/24]. Challenge: I need to connect Cisco ASA 5515x to AWS VPN to reach AWS private network (10.9.4.0/24) to end up having the…
Jubba Smail
  • 196
  • 7
0
votes
3 answers

Configuring L2TP/IPSec on Cisco Router 2911

Hi all, I have problem with L2TP/IPSec configuration in Cisco Router 2911 . I cannot connect via Windows 7,8.1,10 build in vpn client. Here is my config : aaa new-model aaa authentication ppp L2TP-LOGIN local username l2tpuser password cisco …
Elnur M-i
  • 1
  • 1
  • 2
0
votes
0 answers

On an ASA 5505 can you setup Site to Site VPN's as well as Anyconnect or IPSEC VPN's at the same time

I have an ASA 5505 with 3 site-to-site vpn's configured and working. I also want to setup a remote access vpn, either using the AnyConnect wizard or just an IPSEC VPN (again using the wizard) to use the Windows 10 VPN client (which works) using the…
user72593
  • 423
  • 2
  • 6
  • 14
0
votes
1 answer

How to force Port 25 to a VPN IP Address

I have a Cisco RV350 Router with a public IP, but the ISP does not allow port 25, and I have a VPN connection to Azure, so I have a public Azure IP address that allows port 25. How do I forward all port 25 traffic through from my network to…
billsecond
  • 199
  • 9
0
votes
1 answer

Cisco ASA 5505 IPSEC VPN Connecting but not routing traffic

I have a pair of ASA's on my network, Both ASA's have their own Static WAN IP's Internal Interface IP of ASA 1 is 10.7.0.1 (its a /24 subnet) Internal Interface IP of ASA 2 is 10.7.0.2 (same subnet) ASA 1 is running DHCP (scope is 10.7.0.40-100)…
user72593
  • 423
  • 2
  • 6
  • 14
0
votes
1 answer

Cisco VPN dynamic crypto-map

I am trying to setup our Cisco asa 5505 remote VPN access IKEv1 Pre-shared key, so I can access with Windows native VPN client using a L2TP/IPsec tunnel. We have IKEv1 Pre-shared Key setup with a group ID configured already, but since Windows…
Andreas
  • 309
  • 1
  • 5
  • 17
0
votes
0 answers

Anyconnect VPN access slow for far away users

We have our data on a Windows Server 2008 r2 Datacenter, we're using a Cisco ASA 5510, and my staff uses AnyConnect Mobility Client to get on our VPN to access our data. This works well for us when we're on a good internet connection, not far from…
Matthew
  • 59
  • 1
  • 8
0
votes
2 answers

RDP Connectivity to Windows Server 2003 Servers Intermittently Lost After Date Changes

Connectivity via RDP to our Microsoft Windows Server 2003 web and database servers unpredictably drops at varying points after we change the server dates. It usually occurs when we leave the server dates changed and remain logged in via RDP…
iokevins
  • 274
  • 2
  • 18
0
votes
2 answers

Is it possible to configure a Cisco AnyConnect VPN to use two separate LDAP authentication methods simultaneously?

I have a Cisco ASA 5505 with a Security Plus license along with an AnyConnect Plus license. I don't currently have any VPN configuration on the ASA as I'm still in the planning phase. I would like to know if my planned configuration is supported…
Chris
  • 63
  • 2
  • 7
0
votes
2 answers

Can I make VM's accessible over VPN, but not LAN?

In the near future, my firm will begin hosting Terminal Services systems for a few business customers. The Terminal Services Servers will be VM's on one of two large VM hosts. To provide secure access, we will be setting up a site-to-site VPN…
Nic
  • 13,425
  • 17
  • 61
  • 104
0
votes
1 answer

Debian as VPN Server for Cisco ASR

I've to set up a Debian Server who should connected by a Cisco ASR via Side2Side VPN with a preshared key. Tried Open-VPN, but found out that both sides need Open-VPN. So the Cisco ASR is the VPN Client and my Debian server is the VPN Server. Can…
SystemException
  • 11
0
votes
0 answers

Can't connect Cisco 2621 to AWS EC2 Openswan site to site vpn

I am configuring Site-to-Site vpn between my home Cisco 2621 router and Amazon EC2 instance running openswan. I keep on getting the following message on the openswan server: " NO_PROPOSAL_CHOSEN " My Cisco 2621 router config and Openswan config are…
user1896576
  • 21
  • 2
0
votes
1 answer

It is possible to setup CISCO1921/K9 router for site to Site vpn behind a firewall?

I am looking to buy CISCO1921/K9 to set up site to site vpn with Amazon VPN. We are currently behind a firewall. I am looking to setup the new CISCO1921/K9 router as per the quick text diagram below. Will my setup work? and what ports will I need to…
user1896576
  • 21
  • 2
1 2 3
…
15 16