Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [cisco-vpn]

240 questions
1
vote
1 answer

Route traffic on vpn to another interface on an ASA 5510

I have a ASA 5510 that has about 60-70 vpn tunnels. I have four interfaces on the device: 1)External, 2)192.168.1.0, 3)192.168.2.0, 4) 192.168.3.0 A VPN tunnel is configured from the remote site (192.168.200.0) to the 192.168.2.0 subnet on the ASA.…
Dave
  • 317
  • 4
  • 14
1
vote
1 answer

How to connect to a Cisco VPN in "native mode"?

I need to connect to a VPN, but I am not an expert on the subject at all, so if anyone can help me, I would appreciate it. I was given the following data, telling me that this info is for a "Cisco config in native mode". I am going to paste…
forvas
  • 161
  • 1
  • 9
1
vote
1 answer

How to use SMB Multichannel over VPN?

According to this article SMB Multichannel can provide the following capability: Increased Throughput - The file server can simultaneously transmit additional data by using multiple connections for high-speed network adapters or multiple network…
Appleoddity
  • 3,488
  • 2
  • 13
  • 33
1
vote
0 answers

Cisco RV345 SSLVPN Switch on the network cant connect to my TFTP server over VPN

I am trying to upgrade a Cisco SG200-50 switch boot code via TFTP over a VPN connection. My computer/TFTP Server is 172.21.0.3 which is the SSL VPN subnet of the Cisco RV345 router I am using. The RV345 Router is at 172.21.39.5 The SG200-50 is at…
Andre Savoie
  • 51
  • 3
1
vote
3 answers

Can't ping certain IP's on same subnet?

Firstly all devices are ON and have an active/working network connection. Secondly the device I'm trying to ping from is pingable from the devices I'm trying to ping! Right, we have a secure VPN tunnel using a Cisco ASA 5500 which has a working VPN…
stead1984
  • 577
  • 8
  • 16
  • 32
1
vote
0 answers

Can't establish a connection to the VPN gateway IP

I have just setup a site-to-site vpn between a Strongswan instance and an AWS VPN Gateway, as the follows: 1.1.1.1 <-----> Strongswan (2.2.2.2) <---> AWS (VPC 172.0.0.0/8) From the AWS, I can ping IPs in 1.1.1.1. From the Strongswan instance I can…
Giovani Grifante
  • 111
  • 2
1
vote
1 answer

Is The Cisco AnyConnect licenses shariable between two low-end ASAs?

I have two low-end Cisco ASA 5506-X with bundled Security Plus licenses. These ASAs are just for remote dial-in VPN access for our staff. Now all users using IKEv2 and IPSec/L2TP (IKEv1) connection methods but IPSec works unstable sometimes under…
Vadim Rybalko
  • 111
  • 3
0
votes
1 answer

Why doesn't QuickVPN on the RV082 work anymore?

Anyone know why users who were able to access the VPN on a Linksys RV082 router via the QuickVPN client would no longer work? Below is a screen shot of the error message that users are receiving. We've tried this with three different users, and…
Matthew Rankin
  • 1,175
  • 5
  • 15
  • 32
0
votes
0 answers

Does Cisco VPN client 5 support split tunneling and if so, how do I use it?

We're using an old version of this VPN client (stipulated by a client) to connect to their system. It looks like this: I am running this on a VM accessed by RDP and the issue is as soon as I connect, my RDP session is lost and the VM cannot be seen…
Mr. Boy
  • 281
  • 3
  • 9
0
votes
1 answer

Verizon VPN to AWS VPC

I was wondering if Verizon can terminate their VPN to AWS VPC ? Our existing setup has Cisco Router (CSR1000V) running on EC2 instance and Verizon VPN is terminated on the public IP of the EC2 instance. That's how the Verizon traffic enter AWS VPC.
roy
  • 119
  • 1
  • 2
  • 15
0
votes
1 answer

Issues with Cisco IPSec VPN speed. Fast uploads, slow downloads from external to internal servers

We are using a Cisco ASA5516, configured with a IPsec (IKEv1) split tunnel VPN. When uploading files to a server behind the firewall, the transfer speeds are normal (up to 10mbps). When downloading files from the server, it's sitting around 100kbps…
ChrisKnowles
  • 101
0
votes
1 answer

Is it necessary to create a client to gateway VPN tunnel for QuickVPN users on the RV082?

Using the Linksys/Cisco RV082 router, is it necessary to create a Client to Gateway tunnel if all of the remote VPN users will be using Cisco's QuickVPN client, or can you simply configure the QuickVPN clients using the VPN Client Access page and…
Matthew Rankin
  • 1,175
  • 5
  • 15
  • 32
0
votes
0 answers

One end user intermittently unable to access file share over Cisco VPN

Users connect to our network remotely via Cisco AnyConnect Client software to our ASA 5505. Most users are having no issues at all, but I have one user who sometimes has the situation where she's able to connect, I can see she's connected, but she…
teleute00
  • 347
  • 1
  • 4
  • 16
0
votes
1 answer

Cisco AnyConnect disconnects when prompted by UAC

I have a secure network configured with Cisco AnyConnect SSL VPN and Cisco ISE for authentication. (VPN head is a Cisco ASA, AnyConnect v4.5, ISE v2.3) The client VPN works perfectly except when a user needs to elevate privileges (through UAC). When…
egmackenzie
  • 101
  • 4
0
votes
1 answer

Strongswan to Cisco ASA with multiple right subnet

I've got an ikev2 tunnel up, initiated on the left from an ubuntu box with strongswan going to a cisco asa. Using ASA to ASA multiple networks work but I can not get it with strongswan. #config setup # strictcrlpolicy=yes # uniqueids =…
parsecpython
  • 395
  • 2
  • 6
  • 16
1 2 3
…
15 16