Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [cisco-pix]

The Cisco PIX line of products were devices that provided firewall and VPN functionality.

The Cisco PIX line of products were devices that provided firewall and VPN functionality.

They have been replaced by the Cisco ASA line of products. Many of the configuration commands used in PIX are the same or similar to those used in ASA, particularly earlier versions of the ASA operating system (version 7.x). Therefore, many useful answers to PIX related questions may be found under Cisco-ASA questions.

85 questions
0
votes
3 answers

Swapping out a hardware firewall does the mac address get cached?

We need to replace a hardware firewall (cisco pix) and have a spare that we will use (temporarily). The firewall sits in front of a couple of web-servers colocated at a data-centre. The replacement will be configured with identical settings…
Dan
  • 783
  • 1
  • 13
  • 21
0
votes
1 answer

Cannot reach LAN clients on pix 501 when VPN is connected

This is becoming rather frustrating. I'm trying to set up a VPN on a pix 501 using Cisco client v5. The connection is established fine but I cannot see the clients on the inside interface of the pix at all. Here's the configuration. Note: ips for…
Bourne
  • 1,039
  • 5
  • 18
  • 24
0
votes
1 answer

Issues connecting to a pix 501 via console cable

Have a pix 501 that was set up to do filtering and I was working on setting the vpn up when I lost ssh connectivity. Looking at the front, all 4 lan lights blink intensely green but in a very repetitive pattern. The funny thing is there are only 3…
Bourne
  • 1,039
  • 5
  • 18
  • 24
0
votes
5 answers

Cisco PIX - What does this line do?

I found this line in among many other ACL lines in my PIX. It looks different than the rest of them. It's at the end of the rest of the ACL lines, including being after access-list acl-out deny ip any any. access-list 110 permit ip 165.138.236.0…
eleven81
  • 417
  • 6
  • 13
  • 29
0
votes
3 answers

Cisco PIX 501 firewall configuration

I have bought PIX 501 router for my home network (2 laptops and broadband cable modem). I am trying to configure it. I am able to connect to PIX via console and Hyperterminal. I used initial setup procedure. But I cannot connect to PIX from the…
Maxim
0
votes
1 answer

Cisco PIX Port Fort Forwarding

I have the pix running on this network range 192.100.10.0 255.255.255.0 And my server which is on the network 192.200.10.0 255.255.255.0 And my servers IP: 192.200.10.11 I added these commands into the conf of the PIX static (inside,outside) tcp…
Sparky
  • 242
  • 1
  • 5
  • 12
-1
votes
2 answers

Cisco PIX 515E Remote SSH

What configuration lines/steps are required to enable WAN side SSH for the Cisco PIX? In addition what considerations should be made to ensure your connections are secure?
JPrescottSanders
  • 519
  • 2
  • 5
  • 12
-1
votes
1 answer

how to Mitigate UDP flood with PIX

G'day, can any one tell me how to Mitigate UDP flood with PIX cheers
user59156
-1
votes
1 answer

PIX 515 Vlan cannot access the internet

I have a vlan configured behind a PIX and the main network can get to the internet but the vlan devices cannot get to the internet. I have tried configuring a virtual vlan interface on the inside interface but that didn't help either. Any…
garfield81
-3
votes
2 answers

Hack Cisco Pix 501 to Run Linux

Can a Cisco Pix 501 be hacked to run Linux with a similar feature set? Is this possible? Has it ever been done? The pix seems like reliable solid-state hardware and it would be cool if I could run an open source solution on it. The Cisco Pix 501 is…
LonnieBest
  • 1,510
  • 4
  • 22
  • 39
1 2 3 4 5
6