Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [adsl]

Asynchronous Digital Subscriber Line is a layer 1 networking protocol, typically used for last mile Internet access. It utilises standard telephone cabling and coexists with analogue telephones. An ADSL modem at the customer premises communicates with the DSLAM at the local exchange. ATM is usually used as the layer 2 protocol, with PPPoE or PPPoA used for authentication.

103 questions
0
votes
2 answers

Routing DSL modem to web server

I am using "D-LINK DSL-2520U ADSL2+ ETHERNET/USB COMBO ROUTER" broadband modem. I hosted a web site using a web server in my PC (port 80). When I tried to access my external IP from my mobile, it took me to the DSL router admin screen. I tried to…
yottabrain
  • 101
  • 3
0
votes
1 answer

What is a "Latency Outage"?

I'm one of many customers of Windstream, the only internet provider in my area, and just after having hit the 1-year mark of being a customer, my 10M internet connection became about a 512k connection. I occasionally get my actual 10M speed, but…
Nathan Wheeler
  • 127
  • 4
0
votes
1 answer

Getting authentication window when browsing web sites on my server

I have a windows home server. When I browse from the net any web site in it I get an authentication window with the next message: "http://mydomain.com site requires user name and password, the site says: "SmartAX". Then when I close the window I get…
Sami-L
  • 253
  • 2
  • 6
  • 17
0
votes
7 answers

ADSL with static IP address?

I would like to know which ISPs offer DSL/ADSL service with static ip address? It doesn't matter if it is for home or business users, if you know some just name it. Thanks in advance
milejk
0
votes
1 answer

Asus AM602 Modem (cant change setting)

Hi I have a DSL modem (Asus AM602 ) but when I want to connect my modem (192.168.1.1) it said : internet explorer could not open the search page I 99% sure that my modem ip was 192.168.1.1. any one know what's the problem?
Amirreza
  • 684
  • 2
  • 7
  • 12
0
votes
2 answers

Annex-A vs Annex-B ADSL splitters

While trying to improve our Adsl connection, I found that we use a splitter that is from an unknown ventor and have no clue whether is for AnnexA (PSTN) or AnnexB (ISDN) line. Is it possible that somebody used the wrong splitter and just because it…
Odys
  • 221
  • 5
  • 15
0
votes
2 answers

Windows VPN not authenticating from ADSL to Wireless link

I have a normal windows VPN on a computer connecting to a 196.201.x.x/24 IP. If this VPN tries to connect from any address in the 41.x.x.x range it cant get there. The server is a normal windows 2008 server, running exchange with a PPPoE IP natted…
deanvz
  • 55
  • 1
  • 7
0
votes
6 answers

Alias IP addresses - which subnet mask to use?

I confess - I'm a tad lost. Our ISP has provided us with several additional IP addresses for our ADSL2 account. The email they sent specified ip addresses with subnet 255.255.255.240: 203.214.69.1/28 to 203.214.69.14/28 gw: 203.206.182.192 I'm…
chickeninabiscuit
  • 1,104
  • 6
  • 20
  • 33
0
votes
2 answers

two network from one adsl connection,

If i use a telephone splitter at an adsl line and connect a VPN test modem and the existing modem to the output of the line splitter,can i get two network with different static ip address? I know this is not a best practice as it can results in…
ryju
  • 47
  • 3
0
votes
2 answers

DSL :: Connection top speed is ok, but acceleration is low

My 2048 Kb/S ADSL connection downloads at the expected download speed 220 KB/s , but it takes too long to get to that speed, in other words the top speed is fine but the acceleration is terrible. This is not a problem with large downloads because…
doc_id
  • 1,509
  • 2
  • 12
  • 17
0
votes
2 answers

Multiple WAN loadbalancing?

What's the best way to load balance multiple DSL LAN connections in a small office (circa 30 people). If there is a Cisco product that can do this, please recommend, as it will help comply with a broader support contract.
chrism2671
  • 2,579
  • 9
  • 34
  • 45
0
votes
1 answer

TCP connection hangs after transferring 1024 bytes

I'm having a strange problem on a connection behind a Cisco modem connecting to a DSL network : outbound connections hang after transferring exactly 1024 bytes. Inbound connections are just fine. This is 100% reproducible on all of the router ports…
François Feugeas
  • 1,413
  • 10
  • 17
0
votes
1 answer

wic card not recognised - cisco 2821

I've installed a new ADSL2+ supporting HWIC1 card in a cisco 2821 router but its not being recognised. Any ideas why it might not be seeing it? %GT96K_FEWAN-1-UNKNOWN_WIC: NM slot 0, wic card has an unknown id 4C8 Thanks
Jude
  • 1
0
votes
1 answer

DHCP requests from wlan client not reaching server

I have a dhcp (and dns) server running on a centos/linux pc, which is the only dhcp server on my network. I have two wireless routers - a Netgear DG834G, and a Netgear DGND3700. The DGND3700 is also the ADSL Router so it is specified as the gateway…
Musaul
  • 101
  • 4
0
votes
1 answer

Which brands of wireless routers and DSL modems care about security?

Which vendors have established a strong security process during development where they educate firmware developers about security issues, arrange security engineers to review the code, accept vulnerability reports, fix any vulnerabilities found and…
Till Ulen
  • 123
  • 4
1 2 3 4
5
6 7