Whenever I try to boot from a USB stick I get the Red Screen Of Death. I've tried to load VMWare, Windows and Linux from a bootable USB but nothing.
Asked
Active
Viewed 2.6k times
1
-
Did you just buy this off eBay? Clear the NVRAM first. – Michael Hampton Jul 13 '19 at 16:41
2 Answers
2
Reboot again. (cold Boot) Press F9 to enter the RBSU Check, if the „USB Boot Support“ is enabled. If not, enable it. Go to „System Options“ > „USB Options“ > „Removable Flash Media Boot Sequence“ and select the proper boot device there. Then select “Standard Boot Order” (IPL) and choose to start from “USB Drive Key (C:)” first.
In Reference to https://seiler.it/red-screen-death-illegal-opcode-error/
djdomi
- 1,599
- 3
- 12
- 19
0
I had to replace the CMOS Battery of my HP ProLiant MicroServer Gen8 - I spent all day yesterday trying all kinds of stuff but then today I remembered someone mentioning the CMOS Battery.
Changed it, plugged the power in and suddenly Windows can install!
Mikael Dúi Bolinder
- 326
- 2
- 3
- 17
-
Hi, the question state a HP server, can you elebarate on why it could be the same problem than the OP you fixed, thanks! – yagmoth555 Aug 04 '19 at 11:55
-
@yagmoth555 thought everyone knew the MicroServer is a ProLiant... – Mikael Dúi Bolinder Aug 04 '19 at 22:08