I have set up cisco XRv 9000 in KVM Environment.I allocated 3 interfaces in xml file.
<interface type='bridge'>
<mac address='52:f2:fe:00:00:30'/>
<source bridge='br.vinet'/>
<target dev='vn52f2fe000030'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x01' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:f2:ff:00:00:30'/>
<source bridge='br.vsnet'/>
<target dev='vn52f2ff000030'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x02' function='0x0'/>
</interface>
<interface type='bridge'>
<mac address='52:f2:fe:00:00:33'/>
<source bridge='br.vsnet'/>
<target dev='vn52f2fe000033'/>
<model type='e1000'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</interface>
But when i log and execute show interfaces i get below out put. seems like only one interface has up.
RP/0/RP0/CPU0:ios#show interfaces
Mon Apr 22 04:58:00.248 UTC
Null0 is up, line protocol is up
Interface state transitions: 1
Hardware is Null interface
Internet address is Unknown
MTU 1500 bytes, BW 0 Kbit
reliability 255/255, txload Unknown, rxload Unknown
Encapsulation Null, loopback not set,
Last link flapped 2d21h
Last input never, output never
Last clearing of "show interface" counters never
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 total input drops
0 drops for unrecognized upper-level protocol
Received 0 broadcast packets, 0 multicast packets
0 packets output, 0 bytes, 0 total output drops
Output 0 broadcast packets, 0 multicast packets
MgmtEth0/RP0/CPU0/0 is administratively down, line protocol is administratively down
Interface state transitions: 0
Hardware is Management Ethernet, address is 52f2.fe00.0033 (bia 52f2.fe00.0033)
Internet address is Unknown
MTU 1514 bytes, BW 1000000 Kbit (Max: 1000000 Kbit)
reliability 255/255, txload 0/255, rxload 0/255
Encapsulation ARPA,
Full-duplex, 1000Mb/s, EX, link type is autonegotiation
output flow control is off, input flow control is off
loopback not set,
Last input never, output never
Last clearing of "show interface" counters never
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 total input drops
0 drops for unrecognized upper-level protocol
Received 0 broadcast packets, 0 multicast packets
0 runts, 0 giants, 0 throttles, 0 parity
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 total output drops
Output 0 broadcast packets, 0 multicast packets
0 output errors, 0 underruns, 0 applique, 0 resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
did i miss something or did i mis-configure ?
I am newbie to CISCO XRv 9000 :D
