0

I have an hp DL380 G7 in a 10.0.0.0 network. When I VPN into the network my PC gets assigned an ip in the 10.0.8.0 network. I cannot ping my iLO interface from this network. However I can ping it from a different machine in the 10.0.0.0 network.

Where can I change the configuration so that I can access iLO outside of the 10.0.0.0 network? I've checked my firewall and it allows all traffic from 10.0.8.0 to 10.0.0.0.

Mark Allison
  • 2,188
  • 7
  • 26
  • 45
  • Is it only the ping that is not working? Or also http/https? As far as i know, many firewalls block ICMP over the gateway, even if firewall rules allow connections between the networks. – Tobias Jun 22 '18 at 09:43
  • @Tobias I cannot access the website either. I can ping other machines on the 0 network from the 8 network fine. It's just the iLO I can't access. When the server power is on, I can access the server itself fine from the 8 network, but not iLO. – Mark Allison Jun 22 '18 at 09:45
  • At the moment i do not have HP servers, but i worked with them before. And i do not remember any setting that would block traffic from external subnets... If traffic to other systems in the same subnets is working fine, i would at first check the gateway in the network settings of ILO. – Tobias Jun 22 '18 at 09:49
  • @Tobias that was it! Incorrect default gateway in the iLO network config. Do you want to submit as an answer and I'll accept? Thanks! – Mark Allison Jun 22 '18 at 10:15

1 Answers1

2

At the moment i do not have HP servers, but i worked with them before. And i do not remember any setting that would block traffic from external subnets... If traffic to other systems in the same subnets is working fine, i would at first check the gateway in the network settings of ILO.

Tobias
  • 1,236
  • 1
  • 13
  • 25