I'm trying to use a NETAPP X412 drive (15K rpm 600GB) with LSI 9240-8i. The problem is that the drive shows up as 0 KB big, and attempting to set the drive to good fails with the error message "Operation not allowed." Other drives on the controller are working.
Any idea what the problem might be?
Drive info:
Enclosure Device ID: 64
Slot Number: 30
Enclosure position: 0
Device Id: 20
WWN: 5000C5001D.....
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 0 KB [0x0 Sectors]
Non Coerced Size: 0 KB [0x0 Sectors]
Coerced Size: 0 KB [0x0 Sectors]
Logical Sector Size: 512
Physical Sector Size: 512
Firmware state: Unconfigured(bad)
Device Firmware Level: NA03
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000c5001d9.....
SAS Address(1): 0x0
Connected Port Number: 0(path0)
Inquiry Data: NETAPP X412_S15K75.....
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive: Not Supported
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No
Storcli version: Ver 1.21.06 Nov 18, 2016
Controller firmware: 2.130.404-4659
