1

I have 2 servers (X and Y) and an SMTP server for sending emails. X needs to send an email using the SMTP server, however it cannot resolve the host for the SMTP server. This is inevitable and I need a way around it (I can't do any DNS modifications). However, Y is able to connect to the SMTP server and X can connect to Y.

So then:

1) Can I set up Y to appear as an "SMTP server" that just relays the emails/requests sent to it from X, to my actual SMTP server?

2) Can I do so with just the IP addresses of the servers? This is for an LAN network and I don't have any domain names nor host names, only IPs.

3) Does anyone have a clear guide/example of how this can be done? I'm not familiar with SMTP Relaying nor Postfix, so I would appreciate verbose explanations.

I believe Postfix can do this, however, I did not come across any guides for my scenario. I'm open to other tools.

Both servers are Linux (Redhat/Centos).

Anfernee
  • 113
  • 1
  • 5

1 Answers1

3

1) Can I set up Y to appear as an "SMTP server" that just relays the emails/requests sent to it from X, to my actual SMTP server?

Yes, edit Y /etc/postfix/main.cf and configure:

mynetworks = 10.0.0.0/8

To accept email only from X (Set the X IP range here)

relayhost = [1.2.3.4]

To do relay (Set the SMTP IP address here)

2) Can I do so with just the IP addresses of the servers? This is for an LAN network and I don't have any domain names nor host names, only IPs.

Indeed, as you can see above.

3) Does anyone have a clear guide/example of how this can be done? I'm not familiar with SMTP Relaying nor Postfix, so I would appreciate verbose explanations.

I agree postfix is a very good option. There are tons of nice postfix guides. Check http://www.postfix.org/BASIC_CONFIGURATION_README.html

Ra_
  • 677
  • 4
  • 9
  • Do I need to configure postfix to listen on a particular address/port? Do I need to open those addresses with iptables? – Anfernee May 11 '16 at 16:00
  • Yes, again edit /etc/postfix/main.cf and sdet interface: inet_interfaces = . listen port: inet n - n - - smtpd Yes, you have to open the addresses/ports you are listening. – Ra_ May 11 '16 at 16:34