MGE UPS Switched PDU

Question

I have an old MGE Switched PDU unit. The one described in this manual: http://www.manualslib.com/manual/102923/Mge-Ups-Systems-Switched-Pdu.html

I didn't use it in years and couldn't remember the admin password of the unit.

I reset it to factory defaults following the procedure described in the manual and did try with the default username/password: admn/admn from the manual but with no luck.

I think the "reset to factory defaults" procedure worked ok but I think I have an old firmware that has a different default password than the admn/admn given in the manuals.

Does anyone with experience with older devices from MGE (www.mgeups.com) knows of some different username/password they used to set as defaults before the admn/admn pair they use now?

Or some other ideas on default username/passwords I could try?

I tried it several times. Still not possible to log in into it with the default login. — Michal T, Apr 17 '16 at 17:38
The pic looks a bit like the APC units. you could try apc/apc or mge/mge or snmp/1234 — user3788685, Jun 28 '16 at 18:42

score 2 · Answer 1 · answered Jul 03 '16 at 17:47

2

To those that may have this same device I found the default username/password. It is MGEUPS/MGEUPS

answered Jul 03 '16 at 17:47

Michal T

121
2

MGE UPS Switched PDU

1 Answers1