2

My purpose is to PXE boot a Windows 7 (x64) Task Sequence on a Lenovo X250 with :

  • SCCM 2012 SP1
  • Boot Image 4.0 x64 / WinPE 6.2 generated with Windows 8 ADK

With these Lenovo drivers for SCCM , I tried several configurations :

  • WinPE Boot Image Driver Packs 3.1 x64 + Windows 7 x64 Pack Driver
  • WinPE Boot Image Driver Packs 5 x64 + Windows 7 x64 Pack Driver.

Both of them didn't allow the download of WinPE and display the endless "connecting to server........." message.

Now, I would like to know the recipe of downloading Boot Image for a Lenovo X250 w/ SCCM 2012 SP1.

If anyone knows, Please share...

GregL
  • 9,370
  • 2
  • 25
  • 36
PascalC93
  • 21
  • 1
  • Is this already a working environment? – Saeed Aug 27 '15 at 13:43
  • So this boot image is already used in a working environment? I need to know this so I can answer better – Saeed Aug 27 '15 at 14:26
  • I checked the SMSPXE.log & It showed that my Image Boot had a DP update problem. I just resolved that problem & now, with the same configuration the problem evolved has following : WinPE 6.2 loop, after downloading. When I prompt a command support & lauch an ipconfig, I got nothing else than a "Configuration IP" message displayed. Despite the fact that I used the Lenovo's WinPE's Driver Pack 5.0 x64, the network card of my X250 seemed to be not recognized... Does somebody please, has a solution ? Best Regards – PascalC93 Aug 28 '15 at 13:21
  • What is the target WinPE version for that driver pack? – MDMoore313 Aug 29 '15 at 12:11
  • I deploying Lenovo X250 with SCCM 2012 SP1 so the boot image that I have generated are 4.0 / kernel 6.2. The drivers Packs are those : http://support.lenovo.com/us/en/downloads/ds102312 – PascalC93 Aug 31 '15 at 06:40
  • My configuration has been just improved as following : - SCCM 2012 SP1 - Laptop Lenovo X250 - Boot Image 4.0 / Kernel 6.2 - Driver from the Lenovo DriverPack WinPE 5.0 for the storage - Driver I218 W8 x64 for the network - Based W7 x64 SCCM TS - W7 x64 SCCM Lenovo Driver Pack X250 Now I get a TCP IP configuration but after accessed the Test Support, my WinPE doesn't download the Task Sequence & the X250 reboot. Any additional advice please ? – PascalC93 Aug 31 '15 at 13:33

0 Answers0