Looks like I need tro replace the Power Supply on one of the machines, but I am confused with the plugs.
The MB (ASROCK 939N68PV-GLAN) has a 24 pin connector and a separate 4 pin (2x2) header.
The original PSU had a 24 pin header and the 4 pin. The 4 pin seems to be required (PC doesn't reach POST if not connected).
In what scenario do I need both the 24 plug and the 4 plug?
Some more info:
The board originally ran with a PCI Express card (ASUS EN8600GT SILENT). the 2x2 plug seems to be close to being fritzed (discolored, probably to much current). The problems observed were PC not reaching POST on boot, and PCI Express card not detected. Other than that, PC is rock stable.
The original PSU seems to boot ok when using only onboard graphics (I don't want to push my luck, though). I currently only have 20+4 replacement PSU's available.