0

I have an IBM BladeCenter S, and I have added two new 450GB SAS disks.

I want to configure the disks as a RAID 0, and assign the new disks to one of the servers in the Bladecenter.

When I connect to the SAS Controller Module using the webclient, there are no options for setting up the RAID, only: "Health and monitoring" and "Configuration" (Zoning)

Please tell me how to configure my SAS disks. Is that possible using the web interface? When I log into the Adv. Mgmt. Module, \MM Control \ License Mgr: Three options:

  • IBM Bladecenter Open Fabric Manager
  • IBM Bladecenter Adv. Open Fabric Manager
  • IBM Bladecenter Open Fabric Manager plugin

Status for all these are "No license". Is it required to have a license for conf. the RAID. This is strange, since the Bladecenter have been running for five years.

sebix
  • 4,313
  • 2
  • 29
  • 47
http1
  • 1

1 Answers1

0

if I'm not mistaken, you have to configure it from the BladeServer itself, not from its module.

grepmaster
  • 143
  • 2
  • 4
  • 14