-4

server standard 2008 r2 unable to boot(blue screen error- STOP: 0x0000007B (0xFFFFF880009A98E8, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000) after configuring raid 1 & Board Intel - x10DRL-I how to fix

Krishnakumar M
  • 1

1 Answers1

1

Preinstall the controller driver in the OS before upgrading. If you can go back to a normal drive setup, install the driver and reboot and redo the config after. Be sure to have a good backup.

In the best case, you did a system image before such upgrade, thus you can switch back easilly

yagmoth555
  • 16,758
  • 4
  • 29
  • 50
  • 1
    That's how I did it - went from Software RAID to `real` RAID. Plug in the card but don't switch. Boot OS and install drivers. Shutdown, switch drives, reboot. Worked like a charm. – ETL Feb 03 '15 at 04:20