Can't find anything online elsewhere, bought the piece on ebay used.. It's out of warranty, Cisco won't have anything to do with telling me how. HELP!
Asked
Active
Viewed 3.4k times
1 Answers
2
To reset the AP follow use the following steps:
- Step 1 Disconnect power from access point.
- Step 2 Press and hold MODE button while you reconnect power to the access point.
- Step 3 Hold the MODE button until the status LED turns amber, and release the button.
- Step 4 After the access point reboots, you must reconfigure the access point by using the Web-browser interface or the CLI.
The initial IP address of the AP is 10.0.0.1 with DHCP server range 10.0.0.11 and 10.0.0.30
