I've a cluster with two nodes installed with "RedHat Entreprise Linux Server 5.6"
If I execute "multipath -ll" on them, I do not get the same result. I've checked within "multipathd -k" with "show paths" and I do not get all paths on server1.
Note that "server1" is the actif node in the cluster.
Please, how can I resolve this problem?
Thanks in advance for your great help
server1root#multipath -ll
mpath2 (3600c0ff000134c3e8d11e44f01000000) dm-2 HP,P2000 G3 FC
[size=558G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=10][active]
\_ 3:0:0:3 sdc 8:32 [active][ready]
mpath1 (3600c0ff000134c3e6e11e44f01000000) dm-1 HP,P2000 G3 FC
[size=95M][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=10][active]
\_ 3:0:0:2 sdb 8:16 [active][ready]
mpath0 (3600c0ff000118c37dc11e44f01000000) dm-0 HP,P2000 G3 FC
[size=558G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=50][active]
\_ 3:0:0:1 sda 8:0 [active][ready]
mpath4 (3600c0ff000134c3e4912e44f01000000) dm-4 HP,P2000 G3 FC
[size=279G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=10][active]
\_ 3:0:0:5 sde 8:64 [active][ready]
mpath3 (3600c0ff000118c371d12e44f01000000) dm-3 HP,P2000 G3 FC
[size=279G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=50][active]
\_ 3:0:0:4 sdd 8:48 [active][ready]
server1root#
multipathd> show paths
hcil dev dev_t pri dm_st chk_st next_check
3:0:0:1 sda 8:0 50 [active][ready] XXXXXXXXX. 19/20
3:0:0:2 sdb 8:16 10 [active][ready] XXXXXXXXX. 19/20
3:0:0:3 sdc 8:32 10 [active][ready] XXXXXXXXX. 19/20
3:0:0:4 sdd 8:48 50 [active][ready] XXXXXXXXX. 19/20
3:0:0:5 sde 8:64 10 [active][ready] XXXXXXXXX. 19/20
multipathd>
server2root#multipath -ll
mpath2 (3600c0ff000134c3e8d11e44f01000000) dm-2 HP,P2000 G3 FC
[size=558G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=50][active]
\_ 2:0:0:3 sdc 8:32 [active][ready]
\_ round-robin 0 [prio=10][enabled]
\_ 3:0:0:3 sdh 8:112 [active][ready]
mpath1 (3600c0ff000134c3e6e11e44f01000000) dm-1 HP,P2000 G3 FC
[size=95M][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=50][active]
\_ 2:0:0:2 sdb 8:16 [active][ready]
\_ round-robin 0 [prio=10][enabled]
\_ 3:0:0:2 sdg 8:96 [active][ready]
mpath0 (3600c0ff000118c37dc11e44f01000000) dm-0 HP,P2000 G3 FC
[size=558G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=50][active]
\_ 3:0:0:1 sdf 8:80 [active][ready]
\_ round-robin 0 [prio=10][enabled]
\_ 2:0:0:1 sda 8:0 [active][ready]
mpath4 (3600c0ff000134c3e4912e44f01000000) dm-4 HP,P2000 G3 FC
[size=279G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=50][active]
\_ 2:0:0:5 sde 8:64 [active][ready]
\_ round-robin 0 [prio=10][enabled]
\_ 3:0:0:5 sdj 8:144 [active][ready]
mpath3 (3600c0ff000118c371d12e44f01000000) dm-3 HP,P2000 G3 FC
[size=279G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=50][active]
\_ 3:0:0:4 sdi 8:128 [active][ready]
\_ round-robin 0 [prio=10][enabled]
\_ 2:0:0:4 sdd 8:48 [active][ready]
server2root#
multipathd> show paths
hcil dev dev_t pri dm_st chk_st next_check
2:0:0:1 sda 8:0 10 [active][ready] XXX....... 7/20
2:0:0:2 sdb 8:16 50 [active][ready] XXX....... 7/20
2:0:0:3 sdc 8:32 50 [active][ready] XXX....... 7/20
2:0:0:4 sdd 8:48 10 [active][ready] XXX....... 7/20
2:0:0:5 sde 8:64 50 [active][ready] XXX....... 7/20
3:0:0:1 sdf 8:80 50 [active][ready] XXX....... 7/20
3:0:0:2 sdg 8:96 10 [active][ready] XXX....... 7/20
3:0:0:3 sdh 8:112 10 [active][ready] XXX....... 7/20
3:0:0:4 sdi 8:128 50 [active][ready] XXX....... 7/20
3:0:0:5 sdj 8:144 10 [active][ready] XXX....... 7/20
multipathd>
