After replacment of 2 failed drives on 3ware card i got this:
Ctl Model (V)Ports Drives Units NotOpt RRate VRate BBU ------------------------------------------------------------------------ c0 9500S-4LP 4 4 4 2 5 5 - c1 9500S-4LP 4 4 2 1 1 1 -
On controler c0 insted of 4 drives 2 units i got 4 units and,
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-1 DEGRADED - - - 931.312 OFF OFF u1 RAID-1 DEGRADED - - - 1862.63 OFF OFF u2 JBOD OK - - - 1863.02 OFF OFF u3 JBOD OK - - - 931.513 OFF OFF Port Status Unit Size Blocks Serial --------------------------------------------------------------- p0 OK u2 1.82 TB 3907029168 WD-229813 p1 OK u1 1.82 TB 3907029168 WD-409824 p2 OK u0 931.51 GB 1953525168 5VP39Y p3 OK u3 931.51 GB 1953525168 WD-806869
After some searching, all that i can see is that i would need to recreate all units, but that sound like a bad idea, i would appreciate any advice.
My question is, why are my two new disks shown as JBOD and how can i import them into u0 and u1?
