I am trying to set up a VPN remote access with a Cisco ASDM 6.4 for ASA 5505 Version 8.2(5).
In order to set up the VPN I followed this steps. After this steps my info look like this:
VPN Tunnel Interface: outside
PPP authentication: MS-CHAP-V1 MS-CHAP-V2
IPsec authentication uses pre-shared key: MyKey
Tunnel Group Name: DefaultRAGroup
Default Group Policy: DefaultRAGroup
User authentication using local user database
New users created in the local database: MyUser
Pool of IP addresses for VPN clients: VPN-Pool (10.0.0.10 - 10.0.0.19)
IKE policy Encryption / Authentication / Diffie-Hellman Group: 3DES /SHA/Group 2
Internal network elements expesed to remote VPN users without NAT: any
Split tunneling: disabled
Perfect Forwards Secrecy (PFS): disabled
Then I tested the VPN using a Cisco VPN Client. In the VPN client I use this info:
Host: The public IP where I want to connect
User: DefaultRAGroup
Pass: MyKey
When I try to connect I get this message:
the remote peer is no longer responding reason 412
In the firewall I found that the 500 UDP port was closed and it was blocking those packages. I open that UDP Port but I am still getting that message.
Any advice to solve this problem will be much appreciated!
