0

We bought a HP Proliant ml350 g6 server for our work place. It comes with RAID 5 supportted by SAS disks. It also has SATA 750 GB disk.

We wanted to install windows server 2008, but the SATA disk is not detected. I thought it was a driver issue and installed the OS on the SAS disk. But even after installing the driver for SATA controller, the SATA disk is not detected.

I even tried a diferent slot for the SATA disk, but in vain.

Has this got anything to do with the BIOS settings. I see that all the SATA PCI have IRQ as 10. Should I change the IRQ's ? I think the DVD drive is also SATA.

I have given all the info I know. Please help me out. I am dejected with this.

rboorgapally
  • 233
  • 2
  • 5
  • 18
  • Have you tried connecting a known-good SATA drive to the controller and see if the server recognizes that drive? If so, you probably have a bad SATA drive. – Marcus Aug 12 '09 at 15:41

3 Answers3

1

What if you boot a linux LiveCD like the bootable Ubuntu CD? Does that see the drives on the controller? That could help narrow down if it's a drive/controller issue or a problem with a driver.

Bart Silverstrim
  • 31,172
  • 9
  • 67
  • 87
1

Using the array configuration utility in the boot loader to create a logical disk worked. With this the SATA disk was detected.

rboorgapally
  • 233
  • 2
  • 5
  • 18
0

Sounds like a problem with the disk or SATA cables - I know the P410i controller in that machine well and have connected a number of disks from a variety of manufacturers without issue - try another drive or this suspect drive in another machine if possible.

Chopper3
  • 101,299
  • 9
  • 108
  • 239