0

NOC tech told me this:

I am having troubles loading this server. I set up the HDD in the RAID controller however it does not show up when I try to install CentOS. A quick look at SuperMicro's website shows that this board (X7DCL-3) does not support CentOS using the SAS drives.

http://www.supermicro.com/support/resources/OS/5400_5100.cfm

Anyone have any idea about this? I need 64bit drivers for Centos 5 64bit o/s for this SAS controller.

Clear.Cache
  • 89
  • 1
  • 1
  • 11

2 Answers2

1

According to this post, CentOS 5.2 x64 should work, but 5.3 won't. Have them try loading 5.2.

Adam Brand
  • 6,127
  • 2
  • 30
  • 40
  • I've already tried 5.2 Centos and it still does not show up when I am to select a disk. The drivers do not seem to be included on the disk. I did some searching and attempted to find some drivers in order to manually load, using hints from the link that you provided, however none of them seem to work either. – Clear.Cache Jul 26 '09 at 08:54
  • Did you see this thread: http://www.webhostingtalk.com/archive/index.php/t-742188.html? "X7DCL-3 supports only software RAID or non-RAID on SAS drives! if you need hardware RAID, then you still need to install a standalone hardware RAID card, and your cost will be much higher than just using X7DCL-I board (no on-board SAS ports) to start with." – Adam Brand Jul 26 '09 at 17:13
0

looks like you're going to need a real controller in there. anything based on LSI (IBM/Dell/LSI/HP/etc) is supported with the megaraid driver

pQd
  • 29,981
  • 6
  • 66
  • 109
dyasny
  • 18,802
  • 6
  • 49
  • 64