0

I recently discovered that ping my local router, returns different TTL values​​. The ping 3 switch must pass through before reaching the router, there may be the problem?

192.168.1.99 is the IP of my router , a Cisco WRT120N

Thank you!

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190

Respuesta desde 192.168.1.99: bytes=32 tiempo=29ms TTL=3

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=131

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=111

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=240

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=51

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=66

Traceroute

G:\Documents and Settings\Administrador>tracert 192.168.1.99

Traza a la dirección maxi2011 [192.168.1.99] sobre un máximo de 30 saltos:

1 <1 ms <1 ms <1 ms maxi2011 [192.168.1.99]

Traza completa.

G:\Documents and Settings\Administrador>ping 192.168.1.99

Haciendo ping a 192.168.1.99 con 32 bytes de datos:

Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=190 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117 Respuesta desde 192.168.1.99: bytes=32 tiempo<1m TTL=117

Estadísticas de ping para 192.168.1.99: Paquetes: enviados = 4, recibidos = 4, perdidos = 0 (0% perdidos), Tiempos aproximados de ida y vuelta en milisegundos: Mínimo = 0ms, Máximo = 0ms, Media = 0ms

G:\Documents and Settings\Administrador>

tomelin5
  • 1
  • 2
  • 3
    [Several](http://www.sevenforums.com/network-sharing/224662-why-ttl-unstable.html) people have observed [this](http://homecommunity.cisco.com/t5/Wireless-Routers/WRT120-TTL-prblem/td-p/332193) behavior with the WRT120N. It doesn't appear to be hurting anything. – David Schwartz Oct 12 '12 at 13:45
  • Thanks @DavidSchwartz , I had not notice these posts! – tomelin5 Nov 23 '12 at 13:22

1 Answers1

1

It is something wrong in your network. A layer 2 switch should not decrease TTL. Only routers decrease TTL by 1 when ICMP packet is routed. And of course target machine. But in your case it should have the same value every time.

Try a mtr or traceroute command.

Laurentiu Roescu
  • 2,266
  • 17
  • 17