We are virtualizing our license servers and have to start using network USB hubs for the authentication keys. The ones I've found will be messy in a rack. Has anyone ever seen a rackmountable version? If that's not an option, are there any rackmountable normals hubs? Or maybe some setup I haven't come up with?
Asked
Active
Viewed 9,452 times
4 Answers
2
You mean something like this:
Metal 7-Port USB 2.0 Powered Slim Hub for PC-MAC with Power Adapter
Industrial USB Hub with 7 Ports feature a rugged metal enclosure.
Or this one with 12 ports:
Industrial 12-Port USB 2.0 Powered Hub for PC-MAC DIN-RAIL Mount
Industrial USB Hub with 12 Ports feature a rugged metal enclosure.
-
Better, but it doesn't look rackmountable without having to mount it to a board first. – Joseph Jun 20 '09 at 14:42
-
"12-port hub, you can wall-mount or install onto a DIN rail for convenient access to the ports." – splattne Jun 20 '09 at 14:50
-
Ok, now that's much closer to what I'm looking for. – Joseph Jun 20 '09 at 14:57
0
What i've discovered on gearslutz.com: http://www.gearslutz.com/board/so-much-gear-so-little-time/71862-rackmount-usb-hub-16-ports-2.html
0
Well even at 1U having splattnes suggested devices occupy a rack space seems a bit of a waste - these devices seem easy enough to mount inside a rack cabinet but outside of the actual 19" mount-space. Mounting them to a rack shelf first if you really need them inside that space should also be easy and cheap.
Actual rack-mountable equipment is hard to come by when we're talking about smaller stuff - the options are usually limited to large-scale bays to fit a lot (=more than a couple) of specific devices, like old school modems and whatnot, or very expensive custom frames to hold (usually very expensive) small hardware like the simpler cisco aironet controllers.
I'd say (sadly) you're looking at finding a decent generic shelf to house these things in that satisfies your need for order - or just pin them somewhere to the walls or the rails of the rack.
Oskar Duveborn
- 10,760
- 3
- 33
- 48
0
I know this is an old thread, but thought I'd make an updated answer. USBGear/Coolgear now has several direct rack-mount models:
Industrial 16-Port USB 2.0 Rack Mount Hub with Built-in Power Supply
Industrial 16-Port USB 3.0 Din-Rail/WallMount Hub with output up to 1.5A Charging per port
Fair disclosure: I work for the company and found this thread in our logs.
Caleb
- 1