1

I just ordered server which the hard disk spec is 2 x 1.5TB

but when using df -T only showing 1.5TB:

Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/hda1     ext3   1417219800   1243220 1342824608   1% /
tmpfs        tmpfs     4150720         0   4150720   0% /dev/shm

running mount:

/dev/hda1 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
Alex
  • 6,603
  • 1
  • 24
  • 32
cewebugil
  • 715
  • 3
  • 9
  • 12

2 Answers2

1

Instead of using df try using fdisk e.g.

fdisk -l | grep '^Disk'

Disk /dev/sda: 12.8 GB, 12884901888 bytes
Disk /dev/sdb: 10 GB, 1048576000 bytes

This will list the detected disks in the system.

df will only list information about mounted filesystems.

Edit:

If this is a Solaris system you can use format to list the disks the system knows about

#format </dev/null
Searching for disks ... done


AVAILABLE DISK SELECTIONS:
        0. c1t0d0 <DEFAULT  cyl 1563 alt 2 hd 64 sec 32>
           /pci@0,0/pci15ad,1976@10/sd@0,0
        1. c1t1d0 <VMware-Virtual disk-1.0-200.00MB>>
           /pci@0,0/pci15ad,1976@10/sd@1,0
specify disk (enter its number):
#
user9517
  • 115,471
  • 20
  • 215
  • 297
1

If this is a server, aren't those 2 disks configured as RAID 1? If so, the output is correct. RAID 1 is mirroring, so if you have 2 disks one of them is used to mirror the data from the other, effectively leaving you with SUM OF DISK SPACES / 2.

You will have to check the POST of the server to see if there's anything related to RAID and check if it is indeed a RAID 1 configuration. It can be at the setup too, or a message during POST giving a key combination to enter a Disk Management Interface or something close to that.

coredump
  • 12,713
  • 2
  • 36
  • 56