I am trying to configure Vyatta to act as a wifi to ethernet bridge. I am currently doing this with my windows desktop but want to move it to a dedicated Vyatta box. I have a typical linksys wireless router that operates as my access point. The wireless card in the Vyatta box works just fine and is able to connect when it is configured as a normal wireless client. When I create the bridge between eth0 and wlan0, clients on the lan "behind" Vyatta still can't connect. If I restart Vyatta in this state, it will also not get an IP address from the wireless network any longer.
Any help is greatly appreciated.
Here is my config:
vyatta@Vinz-Clortho:~$ show configuration
interfaces {
bridge br0 {
aging 300
hello-time 2
max-age 20
priority 0
stp false
}
ethernet eth0 {
bridge-group {
bridge br0
}
duplex auto
hw-id 00:0d:60:c4:e5:cc
smp_affinity auto
speed auto
}
loopback lo {
}
wireless wlan0 {
address dhcp
bridge-group {
bridge br0
}
mode g
security {
wpa {
mode both
passphrase ****************
}
}
ssid SRT
type station
}
}
service {
ssh {
port 22
protocol-version v2
}
}
system {
host-name Vinz-Clortho
login {
user vyatta {
authentication {
encrypted-password ****************
}
level admin
}
}
ntp-server 0.vyatta.pool.ntp.org
package {
auto-sync 1
repository community {
components main
distribution stable
password ****************
url http://packages.vyatta.com/vyatta
username ""
}
}
syslog {
global {
facility all {
level notice
}
facility protocols {
level debug
}
}
}
time-zone US/Pacific
}