3

I have found lots of guides on how to create a virtual image of a win xp or newer windows, but it eludes me how I can do that with win 2000 server. Anyone have any good input here? I was hoping to end up using virtualbox.

cc0
  • 83
  • 1
  • 7
  • Can you clarify whether you want to install a virtual machine from scratch or if you would rather convert a currently physical machine to a virtual one? – pacey Nov 25 '10 at 12:44
  • I want to convert a currently physical machine to a virtual one. – cc0 Nov 25 '10 at 13:39

4 Answers4

4

VMware Converter version 3 is supported for 2000. Then you may be able to convert from their format to a VirtualBox format.

I run plenty of 2000 VMware images but cannot remember how I made them. Too long ago and too many other servers later.

Keith Stokes
  • 927
  • 6
  • 7
  • Interesting, I am giving that a whirl. Seems it should be entirely doable to convert to vhd after such a process. Thank you. – cc0 Nov 26 '10 at 07:48
  • Ok, I managed to create a VMDK backup of the win 2000 server harddrive. Then I used the 'vmdk2vhd' tool to convert it to VHD, then I loaded it in VirtualBox. It does start to boot, but it freezes before it loads the windows logo. I tried this on two different computers with different hardware, the same thing happened. I am puzzled as to what the cause could be. – cc0 Nov 29 '10 at 07:23
  • I booted with the win2k cd, used recovery console to fixboot and fixmbr, no difference. Any suggestions here? – cc0 Nov 29 '10 at 08:53
  • 1
    Have you tried having a fiddle with the ACPI settings? Windows can sometimes be a little finicky about being uprooted from its original hardware. – Novex Nov 29 '10 at 11:34
  • 1
    Awesome, this worked! Just enabled IO APIC, that was all I had to do. Thank you Novex! :] – cc0 Nov 29 '10 at 13:55
  • I'm all for open source, but VMware Converter does a good job. Kudos to Keith. – Jeff McJunkin Nov 30 '10 at 20:32
3

You should read up on the Virtualbox documentation on Migrating Windows Machines.

On creating the LowLevel Image mentioned in the above document I would read up on Imaging your Hard Drive using dd

pacey
  • 3,833
  • 1
  • 16
  • 31
  • The 2nd link there might be helpful, although it's going to be hard to do. It's a server located in a server room with lots of security clearances needed, so if I was to hook up an extra drive to it that would certainly take some effort. But thank you, if it comes down to that I might have to attempt it. Hopefully some other option will come up though, I do have remote access to it. – cc0 Nov 25 '10 at 14:21
  • 2
    The problem which prevents current software from working with win2k is that most tools uses Windows' Volume Snapshot feature which is present since WinXP – pacey Nov 25 '10 at 14:45
  • Exactly, therein lies the problem. – cc0 Nov 26 '10 at 07:47
1

Disk2vhd by SysInternals The difference between Disk2vhd and other physical-to-virtual tools is that you can run Disk2vhd on a system that’s online

evg345
  • 384
  • 1
  • 4
0

I believe Symantec's Ghost product can make images that can be run by VMWare

Chris T
  • 76
  • 1