0

I have the following question:

We have a rack at a datacenter with a 208V/60 amp circuit coming into a 208V/60 AMP PDU and I was wondering if we lower the circuit to let say 208V/30 amp or 120/30 amp do I need to change the PDU to a 208V/30 or 120/30 as to match the amperage on the circuit?

I guess my question is if the PDU has to always match the amperage and volts of the circuit?

Thanks in advance

2 Answers2

1

Voltage has to match, amperage has to be less than or equal (but with some margin to spare).

Dennis Williamson
  • 62,149
  • 16
  • 116
  • 151
0

It doesn't need to match no, all you're doing is potentially moving which part will trip out first.

Chopper3
  • 101,299
  • 9
  • 108
  • 239