nginx 502 bad gateway - fastcgi not listening? (Debian 5)

Question

I have experience with nginx but it's always been pre-installed for me (via VPS.net pre-configured image). I really like what it does for me, and now I'm trying to install it on my own server with apt-get. This is a fairly fresh Debian 5 install. I have few extra packages installed but they're all .deb's, no manual compiling or anything crazy going on.

Apache is already installed but I disabled it. I did apt-get install nginx and that worked fine. Changed the config around a bit for my needs, although the same problem I'm about to describe happens even with the default config.

It took me a while to figure out that the default debian package for nginx doesn't spawn fastcgi processes automatically. That's pretty lame, but I figured out how to do that with this script, which I found posted on many different web sites:

#!/bin/bash

## ABSOLUTE path to the PHP binary
PHPFCGI="/usr/bin/php5-cgi"

## tcp-port to bind on
FCGIPORT="9000"

## IP to bind on
FCGIADDR="127.0.0.1"

## number of PHP children to spawn
PHP_FCGI_CHILDREN=10

## number of request before php-process will be restarted
PHP_FCGI_MAX_REQUESTS=1000

# allowed environment variables sperated by spaces
ALLOWED_ENV="ORACLE_HOME PATH USER"

## if this script is run as root switch to the following user
USERID=www-data

################## no config below this line

if test x$PHP_FCGI_CHILDREN = x; then
  PHP_FCGI_CHILDREN=5
fi

ALLOWED_ENV="$ALLOWED_ENV PHP_FCGI_CHILDREN"
ALLOWED_ENV="$ALLOWED_ENV PHP_FCGI_MAX_REQUESTS"
ALLOWED_ENV="$ALLOWED_ENV FCGI_WEB_SERVER_ADDRS"

if test x$UID = x0; then
  EX="/bin/su -m -c \"$PHPFCGI -q -b $FCGIADDR:$FCGIPORT\" $USERID"
else
  EX="$PHPFCGI -b $FCGIADDR:$FCGIPORT"
fi

echo $EX

# copy the allowed environment variables
E=

for i in $ALLOWED_ENV; do
  E="$E $i=${!i}"
done

# clean environment and set up a new one
nohup env - $E sh -c "$EX" &> /dev/null &

When I do a "ps -A | grep php5-cgi", I see the 10 processes running, that should be ready to listen.

But when I try to view a web page via nginx, I just get a 502 bad gateway error.

After futzing around a bit, I tried telneting to 127.0.0.1 9000 (fastcgi is listening on port 9000, and nginx is configured to talk to that port), but it just immediately closes the connection.

This makes me think the problem is with fastcgi, but I'm not sure what I can do to test it. It may just be closing the connection because it's not getting fed any data to process, but it closes immediately so that makes me think otherwise.

So... any advice? I can't figure it out. It doesn't help that it's 1AM, but I'm going crazy here!

does `netcat -nap | grep LISTEN | grep 9000` show the listening socket? w/ php-fcgi php handles the error handling, but when my home-grown fcgi scripts fail to interact w/ fcgi correctly, you can get a 502 error as well. — Jason, Mar 12 '10 at 13:25
You might be interested in using php-fpm sapi. I just had the very symptoms and it turned out that my memcached extension was incompatible with libmemcached 0.39. Only place this showed was in the php-fpm logs! — Martin Fjordvald, Apr 27 '10 at 11:44

score 1 · Answer 1 · answered Mar 12 '10 at 10:09

On my server I use nginx+fcgi as well.

My solution isn't foolproof but at least works. I have this script which uses spawn-fcgi and php5-cgi under /etc/init.d/

#!/bin/bash
PHP_SCRIPT='/usr/bin/spawn-fcgi -a 127.0.0.1 -p 9000 -u www-data -f /usr/bin/php5-cgi'
RETVAL=0
case "$1" in
    start)
      $PHP_SCRIPT
      RETVAL=$?
  ;;
    stop)
      killall -9 php5-cgi
      RETVAL=$?
  ;;
    restart)
      killall -9 php5-cgi
      $PHP_SCRIPT
      RETVAL=$?
  ;;
    *)
      echo "Usage: php-fastcgi {start|stop|restart}"
      exit 1
  ;;
esac
exit $RETVAL

and the related nginx conf is this:

server {
        location ~ .php$ {
                        fastcgi_pass 127.0.0.1:9000;
                        fastcgi_index index.php;
                        include /etc/nginx/fastcgi.conf;
                        fastcgi_param SCRIPT_FILENAME /var/www/hyperblasted/$fastcgi_script_name;
        }
        ...
}

and the fastcgi.conf contains the following

fastcgi_param GATEWAY_INTERFACE CGI/1.1;
fastcgi_param SERVER_SOFTWARE nginx;
fastcgi_param QUERY_STRING $query_string;
fastcgi_param REQUEST_METHOD $request_method;
fastcgi_param CONTENT_TYPE $content_type;
fastcgi_param CONTENT_LENGTH $content_length;
fastcgi_param REQUEST_URI $request_uri;
fastcgi_param DOCUMENT_URI $document_uri;
fastcgi_param DOCUMENT_ROOT $document_root;
fastcgi_param SERVER_PROTOCOL $server_protocol;
fastcgi_param REMOTE_ADDR $remote_addr;
fastcgi_param REMOTE_PORT $remote_port;
fastcgi_param SERVER_ADDR $server_addr;
fastcgi_param SERVER_PORT $server_port;
fastcgi_param SERVER_NAME $server_name;

Hope this helps :)

PS: With this setup I had an issue where the cgi daemon would die every now and then. I worked around this issue by executing this in a cronjob every 5 minutes:

if ps aux | grep 'php5-cgi' | grep -v grep  > /dev/null ; then
        echo "PHP-cgi is runnning !"    
else
        echo "PHP-cgi is down. Starting over..."
        /etc/init.d/php-fcgi start
fi

That's the thing though, when I installed nginx with apt-get, there is no spawn-fcgi binary file. That's why I had to figure out on my own how to spawn the PHP CGI listeners, And they are running... they're just not processing anything. — Sean, Mar 12 '10 at 11:19
Do you know why it dies after few requests? I can't seem to figure it out. :( — Rihards, Nov 02 '11 at 20:20

score 0 · Answer 2 · answered May 16 '11 at 17:30

0

I'm not an expert on this at all. In fact I saw your post because I had the same problem. HOwever, I seem to have been able to get it to work and what I did was change the USERID (www-data) from the /etc/init.d/php-fastcgi file to the user I was currently running. Sorry if this doesn't help or that I can't explain any further, but I thought I'd post it in case it is relevant.

answered May 16 '11 at 17:30

Eric

1

Do you mean the actual owner of the file or the value of the variable `USERID` as set in the file? – Adrian Heine Nov 22 '12 at 12:18

score 0 · Answer 3 · edited Apr 08 '15 at 23:05

0

Try this:

vim /etc/php5/fpm/pool.d/www.conf

and then change

; listen.owner = www-data
; listen.group = www-data

to

listen.owner = www-data
listen.group = www-data

edited Apr 08 '15 at 23:05

dawud

15,096
3
42
61

answered Apr 08 '15 at 21:27

Muhamad Abdulkadir

1
2

nginx 502 bad gateway - fastcgi not listening? (Debian 5)

3 Answers3