I am attempting to create 2 separate shares using 2 very different configs. I can get both going individually from the same system, but not together. Regretfully, I still have some legacy systems that require NT1. I am attempting to build this out as a proxy for SMBv3.
The ask: What parameter/setting am I missing in order to create shares using 2 separate authentication levels?
Primary smb.conf
[global]
config file = /etc/samba/mfg/smb.conf.%m
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
server min protocol = NT1
Referencing the proper machine file smb.conf.server
#======================= Global Settings =======================
[global]
workgroup = NETBIOSDOMAIN
dns proxy = no
realm = mydomain.local
security = ads
password server = MYMASKEDDC01.mydomain.local
# client signing = if_required
# kerberos method = secrets and keytab
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
log level = 5
map to guest = bad user
max log size = 1000
The error logs actually refer to the IP of the server, not the actual hostname. (suspect?: This may be my smoking gun as its not pulling NETBIOS info ?)
[2023/01/17 12:55:56.513607, 3] ../../source3/smbd/smb2_server.c:3861(smbd_smb2_request_error_ex)
smbd_smb2_request_error_ex: smbd_smb2_request_error_ex: idx[1] status[NT_STATUS_UNSUCCESSFUL] || at ../../source3/smbd/smb2_sesssetup.c:146
[2023/01/17 12:55:56.513904, 4] ../../source3/smbd/sec_ctx.c:319(set_sec_ctx_internal)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2023/01/17 12:55:56.513918, 4] ../../source3/smbd/sec_ctx.c:319(set_sec_ctx_internal)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2023/01/17 12:55:56.513925, 4] ../../source3/smbd/sec_ctx.c:319(set_sec_ctx_internal)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2023/01/17 12:55:56.513931, 4] ../../source3/smbd/sec_ctx.c:319(set_sec_ctx_internal)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2023/01/17 12:55:56.513939, 4] ../../source3/smbd/sec_ctx.c:319(set_sec_ctx_internal)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2023/01/17 12:55:56.514512, 3] ../../source3/smbd/server_exit.c:220(exit_server_common)
Server exit (NT_STATUS_CONNECTION_RESET)
Reiterating: If I use the smbv3 config as a stand alone smb.conf file, everything resolves properly & permissions map as expected.
