I have a HP ML350G9, with an array controller type 440ar. On the motherboard there are two 4xSATA-connectors, but when the 440ar is installed, it blocks those two ports.
I found this guide of how to install the 440ar, and one step is to disconnect the cables from port 1/2, but no step is to reconnect. In the picture in step 10, it is visible that the connectors are blocked. But I am wondering if it is possible to install the array controller in a way that it doesnt block the ports? Maybe use some kind of extensions to make room for SATA cables underneath the 440ar?
