0

the output of the pv is showing the name of isci name and not the /dev/sda2 for example. Anyone is telling me why I can hange the name of the pv

lxxxxxx:~ # pvs PV VG Fmt Attr PSize PFree

/dev/disk/by-id/scsi-3600xxxxxxxxxxxxxxxxxxxxxxxa80xx4 vglog lvm2 a-- 128.00g 0

/dev/disk/by-id/scsi-360xxxxxxxxxxxxxxxxxxxxxxx7011574 vgbackup lvm2 a-- 500.00g 0

/dev/disk/by-id/scsi-360xxxxxxxxxxxxxxxxxxxxxxxxx19064 vglog lvm2 a-- 128.00g 0

/dev/disk/by-id/scsi-36000xxxxxxxxxxxxxxxxxxxxxxxxxx31 vglog lvm2 a-- 128.00g 0

/dev/disk/by-id/scsi-3600xxxxxxxxxxxxxxxxxxxxxxxxxxfdf0 vgdata lvm2 a-- 262.00g 0

/dev/disk/by-id/scsi-360xxxxxxxxxxxxxxxxxxxxxxxxxxxdd7c vgdata lvm2 a-- 262.00g 0

/dev/disk/by-id/scsi-360xxxxxxxxxxxxxxxxxxxxxxxxxxxdcc vglog lvm2 a-- 128.00g 0

/dev/disk/by-id/scsi-36000c29xxxxxxxxxxxxxxxxxxxxxxx67 vgshared lvm2 a-- 350.00g 0

/dev/disk/by-id/scsi-36000c29xxxxxxxxxxxxxxxxxxxxxxxbc vgdata lvm2 a-- 262.00g 0

/dev/disk/by-id/scsi-36000c29xxxxxxxxxxxxxxxxxxxxxxx4e vgdata lvm2 a-- 262.00g 0

/dev/disk/by-id/scsi-36000c29xxxxxxxxxxxxxxxxxxxxxxx6a vgbkplog lvm2 a-- 400.00g 0

Thanks and regards

Sargan mc
  • 1
  • Who creates those volume groups and logcial volumes? Do you see anything in `/etc/lvm/lvm.conf` that would point to the reason? By default, the `/dev/disk/by-id/` path is allowed in `filters`. Maybe there's some custom config which would point to the right direction. – eblock Mar 07 '22 at 13:52
  • I have this configuration:# cat /etc/lvm/lvm.conf | grep -v '#' config { checks=1 abort_on_errors=0 profile_dir="/etc/lvm/profile" } devices { dir="/dev" external_device_info_source="none" scan="/dev" obtain_device_list_from_udev=1 filter=["a|/dev/disk/by-id/scsi-36.*|", "a|/dev/mapper/.*|", "r|.*|"] cache_dir="/etc/lvm/cache" cache_file_prefix="" – Sargan mc Mar 07 '22 at 14:21
  • yess you were right... after change the filter it shows the right output – Sargan mc Mar 07 '22 at 14:27

1 Answers1

0

The problem was the filter as tells @eblock:

cat /etc/lvm/lvm.conf | grep -v '#' | grep filter

filter = [ "r|/dev/.*/by-path/.*|", "r|/dev/fd.*|", "r|/dev/cdrom|", "r|/dev/sr.*|", "r|/dev/disk/by-id/usb.*|", "r|loop|", "a/.*/" ]

pvs

connect() failed on local socket: No such file or directory Internal cluster locking initialisation failed. WARNING: Falling back to local file-based locking. Volume Groups with the clustered attribute will be inaccessible. PV VG Fmt Attr PSize PFree /dev/sdb vgbackup lvm2 a-- 500.00g 0 /dev/sdc vgbkplog lvm2 a-- 400.00g 0 /dev/sdd vgshared lvm2 a-- 350.00g 0 /dev/sde vglog lvm2 a-- 128.00g 0 /dev/sdf vglog lvm2 a-- 128.00g 0 /dev/sdg vglog lvm2 a-- 128.00g 0 /dev/sdh vglog lvm2 a-- 128.00g 0 /dev/sdi vgdata lvm2 a-- 262.00g 0 /dev/sdj vgdata lvm2 a-- 262.00g 0 /dev/sdk vgdata lvm2 a-- 262.00g 0 /dev/sdl vgdata lvm2 a-- 262.00g 0

Sargan mc
  • 1