6

I have a Murray lawn mower (Model 20223X12A). The Tecumseh engine model number is TVS 90 4354K. I measured the blade diagonally and it is about 19.5 inches long. It is just a regular blade.

I wanted to know if I can install any type blade or brand as long as the length is the same. I was thinking of getting a 3 in 1 blade.

Rick
  • 173
  • 1
  • 5

1 Answers1

8

In principle, sure - as long as it will fit. Most blades are made to similar strength standards.

Check very carefully that the hole spacings are correct - and that you can tighten the bolt/bolts fully, as you really don't want a blade flying off at speed.

Rory Alsop
  • 2,211
  • 1
  • 17
  • 30
  • Which hole spacing are you referring to? My mower has a bolt with a big washer that attaches to the shaft which holds the blade. – Rick Feb 12 '13 at 22:48
  • 1
    The ones that have a central bolt usually have locating rods or other devices. If it is a single bolt with no other fixings, then you have it easy :-) – Rory Alsop Feb 12 '13 at 23:21