This is an oddball question but I am hoping someone can help me identify this device, which appears intended for use in a kitchen based on its location in a drawer full of other kitchen tools. As you can see it is about 4 inches long.
Asked
Active
Viewed 1.2k times
55
-
5Always reread "Doodad" by Ray Bradbury when given a box full of mystery kitchen tools. – rackandboneman Apr 22 '17 at 15:50
-
Or watch [Dead Ringers](https://www.youtube.com/watch?v=3gdgkfIZdN0&feature=youtu.be&t=43)... – Jason C Apr 24 '17 at 15:01
-
6Wow - your tape measure doesn't have cm on it! Is it normal to only have 1 measurement system on them where you are? – xorsyst Apr 24 '17 at 16:32
-
2I would prefer a banana for scale. – LarsTech Apr 24 '17 at 17:37
-
3One scale is normal in the U.S. for construction tape measures. – JDługosz Apr 25 '17 at 06:40
-
Doodad can be found [on the Internet Archive](https://archive.org/details/Astounding_v32n01_1943-09_Firebelly). – JDługosz Apr 25 '17 at 06:48
3 Answers
105
This is a cherry pitter. The metal ring holds the cherry while the piston forces the pit out right through the cherry.

Basil Bourque
- 684
- 1
- 6
- 12

rackandboneman
- 15,249
- 3
- 37
- 54
-
1Doh! Of course it is. :) Actually I never saw one of these before but now that you describe its function it makes perfect sense. – O.M.Y. Apr 22 '17 at 15:43
-
10I'm guessing it's not that familiar to most people nowadays since most use cherry pie filling or buy canned pitted sour cherries. It works well but I remember how sore and tired my hand was after pitting enough cherries for a pie! – Jude Apr 23 '17 at 09:19
-
@Jude - Out of curiosity does the cherry have to be in a specific orientation for this device to work or can you just drop one in any-which-way? – O.M.Y. Apr 23 '17 at 21:48
-
It'll probably work best if it's oriented so that the plunger is going through where the stem was, @O.M.Y., although up or down doesn't matter. – jscs Apr 23 '17 at 22:26
-
1I was considering modifying the barrel & hopper of an old paintball gun and adding a cam-driven "plunger" to push out the pit to make an automated one of these. Not sure how I would eject the empty cherry, yet. – O.M.Y. Apr 23 '17 at 22:58
-
3Cherry-rigged solutions ... and why do they always put two non-pitted cherries in every jar of pitted ones? – rackandboneman Apr 24 '17 at 06:55
-
1@O.M.Y. : while I'm all for tinkering, be aware that there exist electric cherry pitters as well :). There are also more elaborate and larger ones, with a more ergonomic plunger, that you might easier to adapt automation-wise. – mikołak Apr 24 '17 at 10:41
-
3Wow, it's a very *old-school* cherry pitter! Newer single-cherry, manual pitters are often shaped more like paper staplers and are much easier on the hands. I was gifted a no-name knockoff of [this one](https://www.amazon.com/Dalla-Piazza-Lustro-Cherry-Pitter/dp/B000J1DP2A/ref=sr_1_327?s=kitchen&ie=UTF8&qid=1493056032&sr=1-327&keywords=cherry+pitter) and it's quite nice to use. – SevenSidedDie Apr 24 '17 at 17:49
-
4
Cherry or olive pitter: first two fingers trough the side loops, thumb through the center loop, raise the plunger and insert the fruit pole to pole at the bottom and depress the plunger

fmo
- 41
- 1