Track geometry

Track geometry is concerned with the properties and relations of points, lines, curves, and surfaces in the three-dimensional positioning of railroad track. The term is also applied to measurements used in design, construction and maintenance of track. Track geometry involves standards, speed limits and other regulations in the areas of track gauge, alignment, elevation, curvature and track surface. Standards are usually separately expressed for horizontal and vertical layouts although track geometry is three-dimensional.

Track gauge
By transport mode
By size (list)
Minimum
  Minimum
  Fifteen inch 381 mm (15 in)
Narrow
 
  • 600 mm
  • 610 mm
  • 686 mm
  • (1 ft 11+5⁄8 in)
  • (2 ft)
  • (2 ft 3 in)
 
  • 750 mm
  • 760 mm
  • 762 mm
  • (2 ft 5+1⁄2 in)
  • (2 ft 5+15⁄16 in)
  • (2 ft 6 in)
 
  • 891 mm
  • 900 mm
  • 914 mm
  • 950 mm
  • (2 ft 11+3⁄32 in)
  • (2 ft 11+7⁄16 in)
  • (3 ft)
  • (3 ft1+13⁄32 in)
  Metre 1,000 mm (3 ft 3+3⁄8 in)
  Three foot six inch 1,067 mm (3 ft 6 in)
  Four foot 1,219 mm (4 ft 0 in)
  Four foot six inch 1,372 mm (4 ft 6 in)
  1432 mm 1,432 mm (4 ft 8+3⁄8 in)
  Standard 1,435 mm (4 ft 8+1⁄2 in)
Broad
 
  • 1,445 mm
  • 1,450 mm
  • (4 ft 8+7⁄8 in)
  • (4 ft 9+3⁄32 in)
  Leipzig gauge 1,458 mm (4 ft 9+13⁄32 in)
  Toronto gauge 1,495 mm (4 ft 10+7⁄8 in)
 
  • 1,520 mm
  • 1,524 mm
  • (4 ft 11+27⁄32 in)
  • (5 ft)
 
  • 1,581 mm
  • 1,588 mm
  • 1,600 mm
  • (5 ft 2+1⁄4 in)
  • (5 ft 2+1⁄2 in)
  • (5 ft 3 in)
  Baltimore gauge 1,638 mm (5 ft 4+1⁄2 in)
 
  • 1,668 mm
  • 1,676 mm
  • (5 ft 5+21⁄32 in)
  • (5 ft 6 in)
  Six foot 1,829 mm (6 ft)
  Brunel 2,140 mm (7 ft 1⁄4 in)
Change of gauge
By location
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.