Rajput-class destroyer

The Rajput-class guided-missile destroyers built for the Indian Navy are modified versions of Soviet Kashin-class destroyers. They are also known as Kashin-II class. The ships were built in the former Soviet Union after considerable Indian design modifications to the Kashin design. These included the replacement of the helicopter pad in the original design with a flight elevator, as well as major changes to the electronics and combat systems. Five units were built for export to India in the 1980s. All units are currently attached to the Eastern Naval Command.

INS Rajput (D51) during an exercise sporting Revathi radar.
Class overview
NameRajput
Builders61 Kommunara Shipbuilding Plant
Operators Indian Navy
Succeeded byDelhi class
Planned5
Completed5
Active3
Retired2
General characteristics
TypeGuided missile destroyer
Displacement
  • 3,950 tons standard
  • 4,974 tons full load
Length146.5 m (481 ft)
Beam15.8 m (52 ft)
Draught4.8 m (16 ft)
Propulsion4 × Zorya-Mashproekt M3E gas turbines in COGAG, 72,000 hp (54,000 kW); 2 shafts
Speed35 knots (65 km/h)
Range
  • 4,500 nmi (8,300 km) at 18 knots (33 km/h)
  • 2,600 nautical miles (4,800 km) at 30 knots (56 km/h)
Complement320 (including 35 officers)
Sensors and
processing systems
  • Navigation: 2 x Volga (NATO: Don Kay) radar at I-band frequency,
  • Air: 1 x MP-500 Kliver radar at C-band or 1 x Bharat RAWL (Dutch Signaal LW08) radar at D-band (installed on INS Ranjit),
  • Air/Surface: 1 x MR-310U Angara radar at E-band, replaced by 1 x EL/M-2238 STAR
  • Communication: Inmarsat,
  • Sonar: 1 x hull mounted Vycheda MG-311 sonar replaced with Bharat HUMSA during MLR, 1 x Vyega MG-325 variable depth sonar
Armament
Aircraft carried1 x Ka-28 in last two ships and HAL Chetak helicopter in first three ships
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.