Cromford Canal

The Cromford Canal ran 14.5 miles (23.3 kilometres) from Cromford to the Erewash Canal in Derbyshire, England with a branch to Pinxton. Built by William Jessop with the assistance of Benjamin Outram, its alignment included four tunnels and 14 locks.

Cromford Canal
The end of the canal, in Cromford
Specifications
Locks14
StatusPart navigable, part derelict
Navigation authorityDerbyshire County Council
History
Original ownerCromford Canal Company
Principal engineerBenjamin Outram
Date of act1789
Date completed1794
Geography
Start pointCromford
End pointLangley Mill
Branch(es)Pinxton
Connects toErewash Canal, Nottingham Canal
Cromford Canal
Cromford Wharf
High Peak Junction
Leawood Pumping Station
Leawood Aqueduct River Derwent
End of navigable section
Nightingale Arm
Aqueduct
High Peak Aqueduct
76
yards
Gregory Tunnel
Ambergate
Hag Tunnel
River Amber Aqueduct
A610 Ripley - Ambergate Road
33
yards
Buckland Hollow Tunnel
Midland Main Line
3063
yards
Butterley Tunnel
Butterley Reservoir and feeder
Pinxton Wharf
Erewash Valley line
Codnor Park Reservoir and feeder
Midland Railway – Butterley
1-7
Codnor Park Locks (7)
Portland Basin
Erewash Valley line
8
Butterley Co Lock
9
Stoneyford Lock
10
Stoneyford Deep Lock
11
Stoneyford Shallow Lock
Erewash Aqueduct
12
Vickers Lock
13
Strutts Lock
A610 road bridge
Moorgreen Reservoir and feeder
Langley Mill Basin
Nottingham Canal
14
Langley Bridge Lock
A608 Derby Road bridge
Erewash Canal

From Cromford it ran south following the 275-foot (84 m) contour line along the east side of the valley of the Derwent to Ambergate, where it turned eastwards along the Amber valley. It turned sharply to cross the valley, crossing the river and the Ambergate to Nottingham road, by means of an aqueduct at Bullbridge, before turning towards Ripley. From there the Butterley Tunnel took it through to the Erewash Valley.

From the tunnel it continued to Ironville, the junction for the branch to Pinxton, and then descended through fourteen locks to meet the Erewash Canal at Langley Mill. The Pinxton Branch became important as a route for Nottinghamshire coal, via the Erewash, to the River Trent and Leicester and was a terminus of the Mansfield and Pinxton Railway.

A 6-mile (9.7 km) long section of the Cromford canal between Cromford and Ambergate is listed as a Biological Site of Special Scientific Interest (SSSI) and a Local Nature Reserve.

In addition to purely canal traffic, there was a lively freight interchange with the Cromford and High Peak Railway, which traversed the plateau of the Peak District from Whaley Bridge in the north west, and which descended to the canal at High Peak Junction by means of an inclined plane.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.